u-boot.git/arch/arm/include/asm/arch-imx8/sci, branch master

imx: move imx8 sci header file to include/firmware/imx

2023-05-21T14:54:32Z

Move imx8 sci header file to include/firmware/imx, then we could use build macro to reuse some i.MX8 drivers for i.MX9, such as drivers/cpu/imx8_cpu.c. Signed-off-by: Peng Fan Signed-off-by: Stefano Babic

imx8: scu_api: sync sc_rm_is_pad_owned api change

2023-01-31T18:44:23Z

SCFW has fixed a overflow issue in sc_rm_is_pad_owned API. This requires u-boot to update API implementation, since it will cause compatible issue. Otherwise all pad checking will have problem and cause pad setting not continue. Due to the compatible issue, the new u-boot only works with new SCFW (API version: 1.21 and later). old scfw + old u-boot: API overflow issue old scfw + new u-boot, or new scfw + old u-boot: API compatible issue new scfw + new u-boot: Working Signed-off-by: Ye Li Reviewed-by : Jason Liu Signed-off-by: Marcel Ziswiler

misc: scu_api: Add SCFW API to get the index of boot container set

2020-07-16T09:19:50Z

Add SCFW API sc_misc_get_boot_container to get current boot container set index. The index value returns 1 for primary container set, 2 for secondary container set. Signed-off-by: Ye Li Reviewed-by: Peng Fan

common: Drop log.h from common header

2020-05-19T01:19:18Z

Move this header out of the common header. Signed-off-by: Simon Glass

imx8: Configure SNVS

2020-05-01T11:46:22Z

Add a module to configure the tamper and secure violation of the SNVS using the SCU API. The module also adds some commands: - snvs_cfg: Configure the SNVS HP and LP registers - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP) - tamper_pin_cfg: Change the configuration of the tamper pins - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear status bits Reviewed-by: Fabio Estevam Signed-off-by: Franck LENORMAND Signed-off-by: Ye Li Signed-off-by: Peng Fan

imx8: Update SCFW API to version 1.5

2020-05-01T11:46:22Z

Sync the latest SCFW API with below commit 6dcd0242ae7a53ac ("SCF-105: Revert accidental change") to add interfaces for PM resource reset and read/write SNVS security violation and tamper DGO registers. Reviewed-by: Fabio Estevam Signed-off-by: Ye Li Signed-off-by: Peng Fan

imx8: scu api: Add support for SECO manufacturing protection APIs

2020-05-01T11:46:22Z

SECO provides APIs to support CAAM manufacturing protection: - sc_seco_get_mp_key() - sc_seco_get_mp_sign() - sc_seco_update_mpmr() Add SCFW APIs support. Reviewed-by: Fabio Estevam Signed-off-by: Breno Lima Signed-off-by: Peng Fan

misc: imx8: add more scfw api

2019-10-08T14:36:36Z

Add more scfw api for clk/partition/seco usage The api will be used by ccf/partition/secure boot. Signed-off-by: Peng Fan

imx: scu_api: add sc_pm_is_partition_started

2019-10-08T14:35:59Z

Add sc_pm_is_partition_started to check whether a partition has been started. This will be used to detect M4 partition booted up or not, then we could choose which dtb to use. If M4 is up, we need use dtb, such as imx8qm-mek-rpmsg.dtb. Signed-off-by: Peng Fan

imx: scu_api: add sc_rm_set_master_sid

2019-10-08T14:35:59Z

Add sc_rm_set_master_sid to set stream sid of masters to make sure they could use smmu. Signed-off-by: Peng Fan