u-boot.git/arch/arm/include/asm/arch-mx27, branch v2012.10

mxc: Define architecture identifier

2012-09-01T12:58:30Z

Define ARCH_MXC for i.MX devices. This is useful to identify features or behaviors common to all i.MX SoCs. The i.MX28 is omitted because its architecture is a bit different (like imx/mxc vs. mxs in Linux). Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Cc: Andy Fleming Cc: Kim Phillips

gpio: add gpio api support to mx27 (v4)

2012-09-01T12:58:29Z

The gpio api has been tested on an armadeus apf27. Signed-off-by: Philippe Reynes Acked-by: Stefano Babic

rtc: add support of mx27 rtc

2012-09-01T12:58:25Z

This driver has been tested on board armadeus apf27. Signed-off-by: Philippe Reynes Acked-by: Stefano Babic

mmc: access mxcmmc from mx31 boards

2012-02-12T09:11:26Z

This patch modifies mxcmmc.c to be used not only by i.MX27 but also by i.MX31 boards. Both use the same SD controller, but have different clock set-ups. The i.MX27 imx_get_XXXclock functions are made static to generic.c and a public mxc_get_clock() function is provided. Pins, base address and prototypes for an i.MX31 specific board_init_mmc() are provided. Some of the i.MX27 clock getters are unused and marked as such to avoid warnings (./MAKEALL -s mx27), but the code was left in for future use. Signed-off-by: Helmut Raiger Acked-by: Stefano Babic

MX: serial_mxc: cleanup removing nasty #ifdef

2011-12-06T22:59:40Z

The serial driver for iMX SOCs is continuosly changed if a new SOC or not yet used port is used. CONFIG_SYS__ defines were used only to find the base address for the selected UART. Instead of that, move the base address to the board configuration file and drop all #ifdef from driver. Signed-off-by: Stefano Babic CC: Marek Vasut CC: Wolfgang Denk CC: Fabio Estevam CC: Helmut Raiger CC: John Rigby CC: Matthias Weisser CC: Jason Liu Acked-by: Jason Liu

FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h

2011-09-30T20:01:03Z

Signed-off-by: Marek Vasut Cc: Ben Warren Cc: Stefano Babic Cc: Wolfgang Denk Cc: Detlev Zundel

MX27: Update to autogenerated asm-offsets.h

2011-07-14T13:41:24Z

On i.MX27, the asm-offsets.h file is not yet generated as it should be. Signed-off-by: Stefano Babic CC: Matthias Weisser

mx27: Make the UART port number explicit

2011-07-14T13:41:24Z

mx27_uart_init_pins does the IOMUX setting for UART1 port. Change the function name to make the UART port number explicit. Signed-off-by: Fabio Estevam

imx: Get fec mac address from fuse

2010-11-21T17:24:20Z

The patch is to support getting FEC MAC address from fuse bank. Signed-off-by: Jason Liu Tested-by: Stefano Babic

arm, mx27: add support for SDHC1 pin init

2010-04-30T10:23:23Z

Signed-off-by: Heiko Schocher