u-boot.git/arch/arm/include/asm/arch-mx35, branch v2012.04Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/arch/arm/include/asm/arch-mx35?h=v2012.042012-04-16T12:53:59Zimx: Remove unneeded/repititive definitions from imx headers2012-04-16T12:53:59ZVikram Narayananvikram186@gmail.com2012-04-10T04:25:57Zurn:sha1:a9407f2bc51ed118c47a2e60396466bba78c57a6
Remove gpio related unused/repititive definitions from imx headers.
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
mxc_spi: move machine specifics into CPU headers2012-02-27T20:19:23ZEric Nelsoneric.nelson@boundarydevices.com2012-01-31T07:52:03Zurn:sha1:08c61a589b75154e274394972acffe71dbdb75c1
Move (E)CSPI register declarations into the imx-regs.h files for each supported CPU
Introduce two new macros to control conditional setup
MXC_CSPI - Used for processors with the Configurable Serial Peripheral Interface (MX3x)
MXC_ECSPI - For processors with Enhanced Configurable... (MX5x, MX6x)
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <jason.hui@linaro.org>
Tested-by: Jason Liu <jason.hui@linaro.org>
MX: serial_mxc: cleanup removing nasty #ifdef2011-12-06T22:59:40ZStefano Babicsbabic@denx.de2011-11-22T14:22:39Zurn:sha1:40f6fffee5917930597bfcc07de1cd879d4994f6
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
MX35: Drop unnecessary prototypes from imx-regs.h2011-11-03T21:56:18ZStefano Babicsbabic@denx.de2011-09-06T14:46:07Zurn:sha1:f6dc192e1496becba7c1c3405b458a9de5dff245
Signed-off-by: Stefano Babic <sbabic@denx.de>
MX35: factorize common assembly code2011-11-03T21:56:18ZStefano Babicsbabic@denx.de2011-08-05T11:43:21Zurn:sha1:324a131e7cfbcc6a65cf6d7f5a455e47ff613b0c
Signed-off-by: Stefano Babic <sbabic@denx.de>
MX35: add pins definition for UART32011-11-03T21:56:17ZStefano Babicsbabic@denx.de2011-08-05T07:12:34Zurn:sha1:e0a83cc1f5052cd95ce036b5813e8c394731b3b2
Signed-off-by: Stefano Babic <sbabic@denx.de>
MX35: added ESDC structure to imx-regs2011-11-03T21:56:17ZStefano Babicsbabic@denx.de2011-08-05T07:11:11Zurn:sha1:9d940442d39667b3cb78363b583e992ffe76f45e
The structure and PLL defines are added to
the imx-regs.h file and dropped from board
header files.
Signed-off-by: Stefano Babic <sbabic@denx.de>
FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h2011-09-30T20:01:03ZMarek Vasutmarek.vasut@gmail.com2011-09-11T18:05:39Zurn:sha1:8edcc6f221cbd4e718412156a7a33d43d3cfa442
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
MX35: make use of GPIO framework for MX35 processor2011-09-04T09:36:11ZStefano Babicsbabic@denx.de2011-08-21T08:52:04Zurn:sha1:729b74add90f5964b19e76f1de378d372007768e
Signed-off-by: Stefano Babic <sbabic@denx.de>
SPI: mxc_spi: replace fixed offsets with structures2011-02-01T23:54:43ZStefano Babicsbabic@denx.de2011-01-19T22:46:33Zurn:sha1:ac87c17d344ede52d8d421addf92cbb2e271f73e
This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.
Signed-off-by: Stefano Babic <sbabic@denx.de>