u-boot.git/arch/arm/include/asm/arch-mx7ulp, branch v2020.01

mx7ulp: scg: Remove unnused scg_a7_apll_init()

2019-12-06T11:05:08Z

scg_a7_apll_init() is not called anywhere, so remove such dead code Signed-off-by: Fabio Estevam

i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip

2019-10-08T14:35:16Z

The normal target frequency for ULP A7 core is 500Mhz, but now ROM set the core frequency to 413Mhz. So change it to 500Mhz in u-boot. Signed-off-by: Ye Li Signed-off-by: Peng Fan

i.MX7ULP: Fix wrong i2c configuration name

2019-10-08T14:35:16Z

Wrong I2c driver configuration name is used in codes, so I2c driver is not built. Correct it. Signed-off-by: Ye Li Signed-off-by: Peng Fan

i.MX7ULP: Fix PCC register bits mask and offset issue

2019-10-08T14:35:16Z

The offset for FRAC and the mask for PCD are not correct. If we set FRAC, we can't get the right frequency. Fix them to correct value. Signed-off-by: Ye Li Signed-off-by: Peng Fan

i.MX7ULP: Fix system reset after a7 rtc alarm expired.

2019-10-08T14:35:16Z

The board will reboot if A7 core enter mem mode by rtc, then M4 core enter VLLS mode after the RTC alarm expired. Enable the dumb PMIC mode to fix this issue. Since i.MX7ULP B0 moves the SNVS LP into M4 domain, A core can't access it. So check the CPU rev and not apply the settings for B0. Signed-off-by: Bai Ping Signed-off-by: Peng Fan

imx: i.MX7ULP: add get_boot_device

2019-10-08T14:35:16Z

Add get_boot_device for i.MX7ULP Signed-off-by: Peng Fan Tested-by: Fabio Estevam

imx: define ARCH_MXC for i.MX8/8M/7ULP

2019-06-11T08:43:00Z

Without this definition, fsl_esdhc will access reserved registers on i.MX chips, so define ARCH_MXC to fix it. Signed-off-by: Peng Fan Reviewed-by: Fabio Estevam

mx7ulp: Add common plugin codes for mx7ulp

2019-06-11T08:42:48Z

Add common plugin codes to call ROM's hwcnfg_setup and generate IVT2 header. Signed-off-by: Ye Li Signed-off-by: Peng Fan

imx_lpi2c: Update lpi2c driver to support imx8

2018-07-12T09:08:41Z

Add compatible string for i.MX8 and move imx_lpi2c.h from mx7ulp directory to u-boot include directory as a common header file. Signed-off-by: Ye Li Signed-off-by: Peng Fan Reviewed-by: Heiko Schocher

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini