u-boot.git/arch/arm/include/asm/arch-omap4/clock.h, branch master

arm: ti: Introduce back omap4 support

2026-06-17T15:50:36Z

omap4 support was dropped by b0ee3fe642c ("arm: ti: Remove omap4 platform support") because the supported boards hadn't done the conversion to CONFIG_DM_I2C in time. It still exists some omap4-based products and they could benefit from the latest U-Boot support for obvious security reasons. Revert part of b0ee3fe642c to introduce back a minimal support for the omap4 platform. Fix the checkpatch's warning/errors induced by this revert. Following warnings are still present: | arch/arm/include/asm/arch-omap4/clock.h:445: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? | arch/arm/mach-omap2/omap4/hwinit.c:24: WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible | arch/arm/mach-omap2/omap4/sdram_elpida.c:142: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:143: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:144: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:145: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:146: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:147: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:148: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:149: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:150: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:151: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:152: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:153: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:154: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:155: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:156: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:157: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:158: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:159: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:209: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:210: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:213: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:215: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:216: CHECK: Avoid CamelCase: | arch/arm/mach-omap2/omap4/sdram_elpida.c:217: CHECK: Avoid CamelCase: I didn't find an clean way to fix the "don't use #ifdef" warning as we need to define the gpio_bank for the SPL build only. For the CamelCase warnings, the incriminated attributes represent timings, so IMHO, it is more readable with CamelCase. Set myself as OMAP4 maintainer. Signed-off-by: Bastien Curutchet

arm: ti: Remove omap4 platform support

2024-07-23T16:37:48Z

There are no longer any OMAP4 platforms in U-Boot, remove the related functionality. Signed-off-by: Tom Rini

arm: include: ti: Remove duplicate newlines

2024-07-15T18:12:16Z

Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut

arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace

2022-06-06T16:09:00Z

This is always defined to 2, and referenced in two places. Move the define to and make sure the code that uses this includes that file. Make not include that file, as we don't need to be doing so. Signed-off-by: Tom Rini

arm: Don't include common.h in header files

2020-05-18T18:54:24Z

It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

omap4: Properly enable USB PHY clocks

2016-03-15T19:12:50Z

This correctly enables the USB PHY clocks, by enabling CM_ALWON_USBPHY_CLKCTRL and correctly setting CM_L3INIT_USBPHY_CLKCTRL's value. Signed-off-by: Paul Kocialkowski

ARM: OMAP4470: Add voltage and dpll data

2013-08-28T15:44:58Z

OMAP4470 reference design uses TWL6032 PMIC with a following connection scheme: VDD_CORE = TWL6032 SMPS2 VDD_MPU = TWL6032 SMPS1 VDD_IVA = TWL6032 SMPS5 Set voltage and frequency values according to OMAP4470 Data Manual Operating Condition Addendum v0.7 Signed-off-by: Taras Kondratiuk

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

ARM: DRA7xx: clocks: Update PLL values

2013-06-10T12:43:10Z

Update PLL values. SYS_CLKSEL value for 20MHz is changed to 2. In other platforms SYS_CLKSEL value 2 represents reserved. But in sys_clk array ind 1 is used for 13Mhz. Since other platforms are not using 13Mhz, reusing index 1 for 20MHz. Signed-off-by: Lokesh Vutla Signed-off-by: Sricharan R