<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/arch/arm/include/asm/arch-tegra124, branch master</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>pinctrl: tegra: add Tegra K1 support</title>
<updated>2025-02-26T11:08:19+00:00</updated>
<author>
<name>Svyatoslav Ryhel</name>
<email>clamor95@gmail.com</email>
</author>
<published>2024-11-21T12:43:00+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a237a209933de579dc16e768502850fee486fda6'/>
<id>a237a209933de579dc16e768502850fee486fda6</id>
<content type='text'>
Tegra 124 is fully compatible with existing Tegra pincontrol
driver, but it needs a specific MIPI PAD control pinconfig.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Tegra 124 is fully compatible with existing Tegra pincontrol
driver, but it needs a specific MIPI PAD control pinconfig.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: tegra124: clock: implement PLLD2 support</title>
<updated>2025-02-12T08:35:17+00:00</updated>
<author>
<name>Svyatoslav Ryhel</name>
<email>clamor95@gmail.com</email>
</author>
<published>2024-11-15T19:13:15+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=e4f5741c6dc3ba5d867336244c53eb092b273f60'/>
<id>e4f5741c6dc3ba5d867336244c53eb092b273f60</id>
<content type='text'>
PLLD2 is a simple clock (controlled by 2 registers) and appears starting
from T30. Primary use of PLLD2 is as main HDMI clock parent.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PLLD2 is a simple clock (controlled by 2 registers) and appears starting
from T30. Primary use of PLLD2 is as main HDMI clock parent.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drivers: pinctrl: create Tegra DM pinctrl driver</title>
<updated>2023-12-19T19:24:30+00:00</updated>
<author>
<name>Svyatoslav Ryhel</name>
<email>clamor95@gmail.com</email>
</author>
<published>2023-11-26T15:54:03+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=91069320a55ae68d78381d578b1feffe75be721f'/>
<id>91069320a55ae68d78381d578b1feffe75be721f</id>
<content type='text'>
The existing pinctrl driver available for Tegra SOC is well
designed, but it lacks DM support. Let's add a DM compatible
overlay, which allows use of the device tree, along with preserving
backward compatibility with all existing setups and the ability
to use it in SPL board configuration stage.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The existing pinctrl driver available for Tegra SOC is well
designed, but it lacks DM support. Let's add a DM compatible
overlay, which allows use of the device tree, along with preserving
backward compatibility with all existing setups and the ability
to use it in SPL board configuration stage.

Signed-off-by: Svyatoslav Ryhel &lt;clamor95@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>doc: replace @return by Return:</title>
<updated>2022-01-19T17:11:34+00:00</updated>
<author>
<name>Heinrich Schuchardt</name>
<email>heinrich.schuchardt@canonical.com</email>
</author>
<published>2022-01-19T17:05:50+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=185f812c419f1b4f0d10d9787d59cf9f11a2a600'/>
<id>185f812c419f1b4f0d10d9787d59cf9f11a2a600</id>
<content type='text'>
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt &lt;heinrich.schuchardt@canonical.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt &lt;heinrich.schuchardt@canonical.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>common: Drop linux/bitops.h from common header</title>
<updated>2020-05-19T01:19:23+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2020-05-10T17:40:13+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=cd93d625fd751d55c729c78b10f82109d56a5f1d'/>
<id>cd93d625fd751d55c729c78b10f82109d56a5f1d</id>
<content type='text'>
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: tegra: Use common header for PMU declarations</title>
<updated>2019-06-05T16:16:33+00:00</updated>
<author>
<name>Thierry Reding</name>
<email>treding@nvidia.com</email>
</author>
<published>2019-04-15T09:32:17+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=e9c58f2bb855e02d72a003407afe49d632fd4fc5'/>
<id>e9c58f2bb855e02d72a003407afe49d632fd4fc5</id>
<content type='text'>
There's no need to replicate the pmu.h header file for every Tegra SoC
generation. Use a single header that is shared across generations.

Signed-off-by: Thierry Reding &lt;treding@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There's no need to replicate the pmu.h header file for every Tegra SoC
generation. Use a single header that is shared across generations.

Signed-off-by: Thierry Reding &lt;treding@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: tegra: implement RAM repair</title>
<updated>2018-07-26T20:15:29+00:00</updated>
<author>
<name>Bibek Basu</name>
<email>bbasu@nvidia.com</email>
</author>
<published>2018-06-22T19:02:28+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=3cc7942a4ae5d005ae2812a53d912dbab0e23760'/>
<id>3cc7942a4ae5d005ae2812a53d912dbab0e23760</id>
<content type='text'>
RAM repair has a few pre-requisites:
1) PMIC power supply (rail) enabled.
2) PMC CRAIL power partition powered.
3) Fuse clock active (it's the default).
4) PLLP reshift branch enabled (it's the default, when PLLP is active).

RAM repair also only need run whenever specific partitions are powered
(main SoC and CCPLEX respectively); RAM repair does not need to be
triggered when any other partition changes state.

start_cpu() needs to be re-ordered slightly to match these requirements.
Note that C0NC and CE0 aren't required for RAM repair to
operate, but they also do no harm, so the entire of powerup_cpus() is
moved rather than splitting it up. The call to remove_cpu_resets() is
moved last to ensure that all other actions complete before releasing
reset; since the PMC power partitions are now enabled early, releasing
reset is what causes the CPUs to start executing code, and RAM repair must
complete before the CPU boots.

Note that this commit is the result of squashing a numbmer of commits
in NVIDIA's downstream L4T branch, hence the multiple signoffs below.

Signed-off-by: Bibek Basu &lt;bbasu@nvidia.com&gt;
Signed-off-by: Sandipan Patra &lt;spatra@nvidia.com&gt;
Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
RAM repair has a few pre-requisites:
1) PMIC power supply (rail) enabled.
2) PMC CRAIL power partition powered.
3) Fuse clock active (it's the default).
4) PLLP reshift branch enabled (it's the default, when PLLP is active).

RAM repair also only need run whenever specific partitions are powered
(main SoC and CCPLEX respectively); RAM repair does not need to be
triggered when any other partition changes state.

start_cpu() needs to be re-ordered slightly to match these requirements.
Note that C0NC and CE0 aren't required for RAM repair to
operate, but they also do no harm, so the entire of powerup_cpus() is
moved rather than splitting it up. The call to remove_cpu_resets() is
moved last to ensure that all other actions complete before releasing
reset; since the PMC power partitions are now enabled early, releasing
reset is what causes the CPUs to start executing code, and RAM repair must
complete before the CPU boots.

Note that this commit is the result of squashing a numbmer of commits
in NVIDIA's downstream L4T branch, hence the multiple signoffs below.

Signed-off-by: Bibek Basu &lt;bbasu@nvidia.com&gt;
Signed-off-by: Sandipan Patra &lt;spatra@nvidia.com&gt;
Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "tegra: Introduce SRAM repair on tegra124"</title>
<updated>2018-07-26T20:15:29+00:00</updated>
<author>
<name>Stephen Warren</name>
<email>swarren@nvidia.com</email>
</author>
<published>2018-06-22T19:02:27+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=daebd48fe849552ce9de9d6311f525134b138974'/>
<id>daebd48fe849552ce9de9d6311f525134b138974</id>
<content type='text'>
This reverts commit 701b7b1d2cf657d435d2bd6caf43d0247d37220d. It will
be immediately replaced by a different implementation that is more
complete and runs are more targetted times.

Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit 701b7b1d2cf657d435d2bd6caf43d0247d37220d. It will
be immediately replaced by a different implementation that is more
complete and runs are more targetted times.

Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>SPDX: Convert all of our single license tags to Linux Kernel style</title>
<updated>2018-05-07T13:34:12+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2018-05-06T21:58:06+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=83d290c56fab2d38cd1ab4c4cc7099559c1d5046'/>
<id>83d290c56fab2d38cd1ab4c4cc7099559c1d5046</id>
<content type='text'>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Various, unrelated tree-wide typo fixes.</title>
<updated>2016-07-16T13:43:12+00:00</updated>
<author>
<name>Robert P. J. Day</name>
<email>rpjday@crashcourse.ca</email>
</author>
<published>2016-07-15T17:44:45+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=62a3b7dd086ef8ceba91e99cceb19704efc1b482'/>
<id>62a3b7dd086ef8ceba91e99cceb19704efc1b482</id>
<content type='text'>
    Fix a number of typos, including:

     * "compatble" -&gt; "compatible"
     * "eanbeld" -&gt; "enabled"
     * "envrionment" -&gt; "environment"
     * "FTD" -&gt; "FDT" (for "flattened device tree")
     * "ommitted" -&gt; "omitted"
     * "overriden" -&gt; "overridden"
     * "partiton" -&gt; "partition"
     * "propogate" -&gt; "propagate"
     * "resourse" -&gt; "resource"
     * "rest in piece" -&gt; "rest in peace"
     * "suport" -&gt; "support"
     * "varible" -&gt; "variable"

Signed-off-by: Robert P. J. Day &lt;rpjday@crashcourse.ca&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
    Fix a number of typos, including:

     * "compatble" -&gt; "compatible"
     * "eanbeld" -&gt; "enabled"
     * "envrionment" -&gt; "environment"
     * "FTD" -&gt; "FDT" (for "flattened device tree")
     * "ommitted" -&gt; "omitted"
     * "overriden" -&gt; "overridden"
     * "partiton" -&gt; "partition"
     * "propogate" -&gt; "propagate"
     * "resourse" -&gt; "resource"
     * "rest in piece" -&gt; "rest in peace"
     * "suport" -&gt; "support"
     * "varible" -&gt; "variable"

Signed-off-by: Robert P. J. Day &lt;rpjday@crashcourse.ca&gt;
</pre>
</div>
</content>
</entry>
</feed>
