u-boot.git/arch/arm/include/asm/arch-tegra2, branch master Unnamed repository; edit this file 'description' to name the repository. tegra20: rename tegra2 -> tegra20 2012-09-01T12:58:21+00:00 Allen Martin amartin@nvidia.com 2012-08-31T08:30:00+00:00 00a2749d7be5b0e6cb6435187ec8fea600b44627 This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: usb: Fix device enumeration problem of USB1 2012-07-09T20:44:34+00:00 Jim Lin jilin@nvidia.com 2012-06-24T20:40:57+00:00 8b3f7bf7ec95816a7d2f89331e8877a351b3ec7c A known hardware issue of USB1 port where bit 1 (connect status change) of PORTSC register will be set after issuing Port Reset (like "usb reset" in u-boot command line). This will be treated as an error and stops later device enumeration. Therefore we clear that bit after Port Reset in order to proceed later device enumeration. Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Warren <twarren@nvidia.com> 
A known hardware issue of USB1 port where bit 1 (connect status
change) of PORTSC register will be set after issuing Port Reset
(like "usb reset" in u-boot command line).
This will be treated as an error and stops later device enumeration.

Therefore we clear that bit after Port Reset in order to proceed
later device enumeration.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: add GMC/GMD funcmux entry for SFLASH 2012-07-09T20:44:33+00:00 Stephen Warren swarren@nvidia.com 2012-06-12T08:33:39+00:00 a016e144ed6a7e17774d3371c29544c329459667 This is used on TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This is used on TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: add ULPI on USB2 funcmux entry 2012-07-09T20:44:33+00:00 Lucas Stach dev@lynxeye.de 2012-05-31T01:51:01+00:00 f97daaa2317b68aacfbf19bb7566183e17db3349 This is needed as a prerequisite for Tegra USB ULPI support within U-Boot. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This is needed as a prerequisite for Tegra USB ULPI support
within U-Boot.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
arm: Tegra: Use ODMDATA from BCT in IRAM 2012-07-07T12:07:21+00:00 Tom Warren twarren@nvidia.com 2012-05-30T21:06:09+00:00 76e350b7a3c568c8d27cf72f98036ec3ddb64f31 Walk the BIT and BCT to find the ODMDATA word in the CustomerData field and put it into Scratch20 reg for use by kernel, etc. Built all Tegra builds OK; Booted on Seaboard and saw ODMDATA in PMC scratch20 was the same as the value in my burn-u-boot.sh file (0x300D8011). NOTE: All flash utilities will have to specify the odmdata (nvflash --odmdata n) on the command line or via a cfg file, or built in to their BCT. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> 
Walk the BIT and BCT to find the ODMDATA word in the
CustomerData field and put it into Scratch20 reg for
use by kernel, etc.

Built all Tegra builds OK; Booted on Seaboard and saw
ODMDATA in PMC scratch20 was the same as the value in my
burn-u-boot.sh file (0x300D8011). NOTE: All flash utilities
will have to specify the odmdata (nvflash --odmdata n) on
the command line or via a cfg file, or built in to their
BCT.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.* 2012-07-07T12:07:20+00:00 Tom Warren twarren.nvidia@gmail.com 2012-05-22T12:19:25+00:00 52a8b82074d1c3a3dcde8e3d90e6a04f7eb3a1f8 In anticipation of Tegra3 support, continue removing/renaming Tegra2-specific files. No functional changes (yet). Updated copyrights to 2012. Signed-off-by: Tom Warren <twarren@nvidia.com> 
In anticipation of Tegra3 support, continue removing/renaming
Tegra2-specific files. No functional changes (yet).
Updated copyrights to 2012.

Signed-off-by: Tom Warren <twarren@nvidia.com>
spi: tegra2: rename tegra2_spi.* to tegra_spi.* 2012-07-07T12:07:20+00:00 Tom Warren twarren.nvidia@gmail.com 2012-05-22T07:33:47+00:00 edffa63d3d6e76991998789f9fcbaa483731ca65 In anticipation of Tegra3 support, start removing/renaming Tegra2-specific files. No functional changes (yet). Also updated copyright to 2012. Signed-off-by: Tom Warren <twarren@nvidia.com> 
In anticipation of Tegra3 support, start removing/renaming
Tegra2-specific files. No functional changes (yet).
Also updated copyright to 2012.

Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: Correct PLL access in ap20.c and clock.c 2012-07-07T12:07:19+00:00 Simon Glass sjg@chromium.org 2012-04-19T08:04:39+00:00 27c4a3318f716cce0a23248317534bda7792230b Correct this warning seen by Albert: ap20.c:44:18: warning: array subscript is above array bounds There is a subtle bug here which currently causes no errors, but might in future if people use PCI or the 32KHz clock. So take the opportunity to correct the logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com> 
Correct this warning seen by Albert:

ap20.c:44:18: warning: array subscript is above array bounds

There is a subtle bug here which currently causes no errors, but might
in future if people use PCI or the 32KHz clock. So take the opportunity
to correct the logic now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: add SDMMC1 on SDIO1 funcmux entry 2012-07-07T12:07:18+00:00 Stephen Warren swarren@nvidia.com 2012-05-16T13:54:06+00:00 d1e4607901883c84a2f727c9ae2dac3cfcfd2b91 This will be used on TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This will be used on TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
tegra: add SDIO1 funcmux entry for UARTA 2012-07-07T12:07:18+00:00 Lucas Stach dev@lynxeye.de 2012-05-16T08:21:02+00:00 a2cfe63eeb6a09c52a748849590a898f1032aeea This is based on top of: tegra: add alternate UART1 funcmux entry tegra: add UART1 on GPU funcmux entry v2: remove enum change Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Tom Warren <twarren@nvidia.com> CC: Marek Vasut <marex@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com> 
This is based on top of:
tegra: add alternate UART1 funcmux entry
tegra: add UART1 on GPU funcmux entry

v2: remove enum change

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Tom Warren <twarren@nvidia.com>
CC: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>