u-boot.git/arch/arm/include/asm/fsl_secure_boot.h, branch v2017.09

Convert CONFIG_CMD_HASH to Kconfig

2017-05-22T16:38:15+00:00

This converts the following to Kconfig:
   CONFIG_CMD_HASH

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini 
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini

Convert CONFIG_CMD_ESBC_VALIDATE to Kconfig

2017-05-22T13:33:55+00:00

This converts the following to Kconfig:
   CONFIG_CMD_ESBC_VALIDATE

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

lib: move hash CONFIG options to Kconfig

2017-05-22T12:36:58+00:00

Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal 
Cc: Naveen Burmi 
Cc: Po Liu 
Cc: Shengzhou Liu 
Cc: Priyanka Jain 
Cc: Shaohui Xie 
Cc: Chunhe Lan 
Cc: Chander Kashyap 
Cc: Steve Rae 
Cc: Dirk Eibach 
Cc: Feng Li 
Cc: Alison Wang 
Cc: Sumit Garg 
Cc: Mingkai Hu 
Cc: York Sun 
Cc: Prabhakar Kushwaha 
Cc: Jaehoon Chung 
Cc: Akshay Saraswat 
Cc: Heiko Schocher 
Cc: Jagan Teki 
Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass 
Signed-off-by: Tom Rini

Convert CONFIG_SPL_BOARD_INIT to Kconfig

2017-05-22T11:29:48+00:00

This converts the following to Kconfig:
   CONFIG_SPL_BOARD_INIT

Signed-off-by: Ley Foon Tan 
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini

Convert CONFIG_CMD_BLOB to Kconfig

2017-04-30T14:30:03+00:00

This converts the following to Kconfig:
   CONFIG_CMD_BLOB

Signed-off-by: Simon Glass 
[trini: Add imply CMD_BLOB under CHAIN_OF_TRUST]
Signed-off-by: Tom Rini

armv8: ls1043a: Drop macro CONFIG_LS1043A

2017-04-17T16:03:30+00:00

Use CONFIG_ARCH_LS1043A instead.

Signed-off-by: York Sun

armv8: ls2080a: Drop macro CONFIG_LS2080A

2017-04-17T16:03:30+00:00

Use CONFIG_ARCH_LS2080A instead.

Signed-off-by: York Sun

arm: ls1046ardb: Add SD secure boot target

2017-04-17T16:03:30+00:00

- Add SD secure boot target for ls1046ardb.
- Change the u-boot size defined by a macro for copying the main
  U-Boot by SPL to also include the u-boot Secure Boot header size
  as header is appended to u-boot image. So header will also be
  copied from SD to DDR.
- CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM
  (128K) where 32K are reserved for use by boot ROM and 6K for the
  header.
- Reduce the size of CAAM driver for SPL Blobification functions
  and descriptors, that are not required at the time of SPL are
  disabled. Further error code conversion to strings is disabled
  for SPL build.

Signed-off-by: Vinitha Pillai 
Signed-off-by: Sumit Garg 
Signed-off-by: Ruchika Gupta 
Reviewed-by: York Sun

arm: ls1043ardb: Add NAND secure boot target

2017-04-17T16:03:30+00:00

Add NAND secure boot target for ls1043ardb.

- Change the u-boot size defined by a macro for copying the main
  U-Boot by SPL to also include the u-boot Secure Boot header size as
  header is appended to u-boot image. So header will also be copied
  from SD to DDR.
- MACRO for CONFIG_BOOTSCRIPT_COPY_RAM is enabled to copy Bootscript
  from NAND to DDR. Offsets for Bootscript on NAND and DDR have been
  also defined.

Signed-off-by: Vinitha Pillai 
Signed-off-by: Sumit Garg 
Signed-off-by: Ruchika Gupta 
Reviewed-by: York Sun

arm: ls1043ardb: Add SD secure boot target

2017-04-17T16:03:30+00:00

- Add SD secure boot target for ls1043ardb.
- Implement FSL_LSCH2 specific spl_board_init() to setup CAAM stream
  ID and corresponding stream ID in SMMU.
- Change the u-boot size defined by a macro for copying the main
  U-Boot by SPL to also include the u-boot Secure Boot header size as
  header is appended to u-boot image. So header will also be copied
  from SD to DDR.
- CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM
  (128K) where 32K are reserved for use by boot ROM and 6K for secure
  boto header.
- Error messages during SPL boot are limited to error code numbers
  instead of strings to reduce the size of SPL image.

Signed-off-by: Vinitha Pillai-B57223 
Signed-off-by: Sumit Garg 
Signed-off-by: Ruchika Gupta 
Reviewed-by: York Sun