u-boot.git/arch/arm/include/asm/imx-common, branch v2017.05

board: toradex: colibri_vf: Add DCU support for Colibri Vybrid

2017-04-14T12:03:07Z

The Vybrid SoC family has the same display controller unit (DCU) like the LS1021A SoC. This patch adds platform data, pinmux defines and clock control to enable the driver for Toradex Colibri Vybrid module. Signed-off-by: Stefan Agner Signed-off-by: Sanchayan Maity Reviewed-by: Stefano Babic

imx6: Add src_base structure define macro

2017-03-17T08:27:08Z

Instead of initializing 'struct src' to SRC_BASE_ADDR on every function better to have global define macro. Reviewed by: Stefano Babic Signed-off-by: Jagan Teki

imx: Use IMX6_BMODE_* macros instead of numericals

2017-03-17T08:27:08Z

Use meaningful macros IMX6_BMODE_*, instead of numerical number in boot mode detection code. Cc: Tim Harvey Acked-by: Stefano Babic Signed-off-by: Jagan Teki

imx6: Add imx6_src_get_boot_mode

2017-03-17T08:27:08Z

For i.MX6, the bootmode determine code is part of spl_boot_device, but there is might be a possibility for other part the code need to check the desired boot mode for adding new functionalities like modeboot env variable, or changing boot order etc. So introduced imx6_src_get_boot_mode which actually reading the boot mode register for desired modes. More cleanup will be add in future patches. Cc: Stefano Babic Cc: Tim Harvey Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki Reviewed-by: Stefano Babic

mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP

2017-03-17T08:27:08Z

Update the mxc_ocotp driver to support i.MX7ULP. The read/write sequence has some changes due to PDN and OUT_STATUS registers added and TIME register is removed. Also update the bank size and number. Add is_mx7ulp macro in sys_proto.h Signed-off-by: Peng Fan Signed-off-by: Ye Li Reviewed-by : Stefano Babic

config: Drop CONFIG_ARCH_DMA_PIO_WORDS

2017-01-25T21:42:20Z

This is not defined by any board in U-Boot. Signed-off-by: Simon Glass

arm: imx: add HAB authentication of image to SPL boot

2017-01-02T16:04:38Z

When using HAB as secure boot mechanism on Wandboard, the chain of trust breaks immediately after the SPL. As this is not checking the authenticity of the loaded image before jumping to it. The HAB status output will not be implemented in SPL as it adds a lot of strings that are only required in debug cases. With those it exceeds the maximum size of the available OCRAM (69 KiB). The SPL MISC driver support must be enabled, so that the driver can use OTP fuse to check if HAB is enabled. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld Reviewed-by: George McCollister Tested-by: George McCollister

imx-common: lcdif: update lcdif regs for i.MX6SL/SLL

2016-12-16T10:38:24Z

Update lcdif regs for i.MX6SL/SLL Signed-off-by: Ye.Li Signed-off-by: Peng Fan

imx: mx6sll: add iomux settings

2016-12-16T10:38:24Z

Add iomux settings for i.MX6 SLL Signed-off-by: Peng Fan Signed-off-by: Ye.Li Cc: Stefano Babic

imx: add i.MX 6SLL CPU type

2016-12-16T10:38:24Z

Add i.MX6SLL cpu type. MXC_CPU_MX6D is not a real value in chip, so change it to 0x6A. Signed-off-by: Peng Fan Cc: Stefano Babic