u-boot.git/arch/arm/include/asm, branch v2013.07

Merge branch 'master' of git://git.denx.de/u-boot-arm

2013-07-12T14:36:48Z

Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini

ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114

2013-07-11T21:15:15Z

Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin Signed-off-by: Tom Warren

Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

2013-07-10T18:40:47Z

EXYNOS: Move files from board/samsung to arch/arm

2013-07-05T08:06:55Z

This patch performs the following: 1) Convert the assembly code for memory and clock initialization to C code. 2) Move the memory and clock init codes from board/samsung to arch/arm 3) Creat a common lowlevel_init file across Exynos4 and Exynos5. Converted the common lowlevel_init from assembly to C-code 4) Made spl_boot.c and tzpc_init.c common for both exynos4 and exynos5. 5) Enable CONFIG_SKIP_LOWLEVEL_INIT as stack pointer initialisation is already done in _main. 6) exynos-uboot-spl.lds made common across SMDKV310, Origen and SMDK5250. TEST: Tested SD-MMC boot on SMDK5250 and Origen. Tested USB and SPI boot on SMDK5250 Compile tested for SMDKV310. Signed-off-by: Rajeshwari Shinde Signed-off-by: Minkyu Kang

EXYNOS: Add API for power reset and exit wakeup

2013-07-05T08:06:54Z

This patch adds APIs to get power reset status and exit the wakeup condition for both exynos5 and exynos4 Signed-off-by: Rajeshwari Shinde Signed-off-by: Minkyu Kang

ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5

2013-07-02T13:21:16Z

The omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs. These SoCs have different gpio count but currently omap_gpio driver uses hard coded 192 which is wrong. This patch fixes this issue by: 1. Move define of OMAP_MAX_GPIO to all arch/arm/include/asm/arch-omap*/gpio.h. 2. Update gpio bank settings and enable GPIO modules 7 & 8 clocks for OMAP5. Thanks for Lubomir Popov to provide valuable comments to fix this issue. Signed-off-by: Axel Lin Tested-by: Lubomir Popov Acked-by: Heiko Schocher

am33xx: fix the ddr_cmdtctrl structure

2013-07-02T13:21:16Z

Fix the wrong mapping between the DDR I/O control registers on AM33XX SoCs and the software representation in the SPL code. The most recent public TRM defines the following DDR I/O control registers offsets: * ddr_cmd0_ioctrl : offset 0x44E11404 * ddr_cmd1_ioctrl : offset 0x44E11408 * ddr_cmd2_ioctrl : offset 0x44E1140C * ddr_data0_ioctrl: offset 0x44E11440 * ddr_data1_ioctrl: offset 0x44E11444 While the struct ddr_cmdtctrl has also some reserved bits in the beginning. The struct is mapped to the address 0x44E11404. As a result "cm0ioctl" points to the ddr_cmd1_ioctrl register, "cm1ioctl" to the ddr_cmd2_ioctrl and etc. Registers ddr_cmd0_ioctrl and ddr_data0_ioctrl are never configured because of this mapping mismatch. Signed-off-by: Ilya Ledvich Reviewed-by: Peter Korsgaard

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

2013-06-28T15:51:13Z

SMDK5250: Remove reduntant code

2013-06-28T00:19:38Z

enum boot_mode is defined twice once in spl.h and also in spl_boot.c, hence removing the same from spl_boot.c and including the header file. Signed-off-by: Rajeshwari Shinde Acked-by: Simon Glass Signed-off-by: Minkyu Kang

mx27: add i2c clock

2013-06-26T15:34:21Z

Signed-off-by: Eric Jarrige Signed-off-by: Philippe Reynes