u-boot.git/arch/arm/include, branch v2024.07

clk: rockchip: rk3588: Set SPLL frequency during SPL stage

2024-05-24T09:58:59Z

All parts expect the SPLL to run at 702MHz. In U-Boot it's the SPLL_HZ declaring this rate and in the kernel it's a fixed clock definition. While everything is expecting 702MHz, the SPLL is not running that frequency when coming from the bootrom though, instead it's running at 351MHz and the vendor-u-boot just sets it to the expected frequency. The SPLL itself is located inside the secure-BUSCRU and in theory accessible as an SCMI clock, though this requires an unknown amount of cooperation from trusted-firmware to set at a later stage, though during the SPL stage we can still access the relevant CRU directly. The SPLL is for example necessary for the DSI controllers to produce output. As the SPLL is "just" another rk3588 pll, just set the desired rate directly during the SPL stage. Tested on rk3588-rock5b and rk3588-tiger by reading back the PLL rate and also observing working DSI output with this change. Fixes: 6737771600d4 ("rockchip: rk3588: Add support for sdmmc clocks in SPL") Suggested-by: Andy Yan Signed-off-by: Heiko Stuebner Cc: Jonas Karlman Cc: Quentin Schulz Reviewed-by: Kever Yang

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Merge patch series "arm: Add Analog Devices SC5xx Machine Type"

2024-05-08T01:24:07Z

Greg Malysa says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future.

arch: arm: Add Analog Devices SC5xx machine type

2024-05-08T01:24:00Z

Add support for the SC5xx machine type from Analog Devices. This includes support for the SC57x, SC58x, SC59x, and SC59x-64 SoCs, which have many common features such as common ADI IP blocks, and SHARC DSP cores. This commit introduces core functionality required for all boards using an SC5xx SoC, such as: - SPL configuration - Required CPU hooks such as reset - Boot ROM interaction to load the stage 2 bootloader in the reference configuration. Other options are possible but not officially supported at this time - SoC-common configuration expected to be reused by all boards - Early initialization for system clocks and DDR controller Co-developed-by: Greg Malysa Signed-off-by: Greg Malysa Co-developed-by: Ian Roberts Signed-off-by: Ian Roberts Signed-off-by: Vasileios Bimpikas Signed-off-by: Utsav Agarwal Signed-off-by: Arturs Artamonovs Signed-off-by: Nathan Barrett-Morrison

arm: sunxi: Add missing

2024-05-07T14:00:41Z

These files have many "Linux" style types in them, add Signed-off-by: Tom Rini

arm: aspeed: Add missing

2024-05-07T14:00:40Z

The scu* files have many "Linux" style types in them, add Signed-off-by: Tom Rini

board: rockchip: Remove and add needed includes

2024-05-07T14:00:37Z

Remove from this board vendor directory and when needed add missing include files directly. Reviewed-by: Kever Yang Signed-off-by: Tom Rini

board: nvidia: Remove and add needed includes

2024-05-07T14:00:25Z

Remove from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini

board: freescale: Remove and add needed includes

2024-05-07T14:00:24Z

Remove from this board vendor directory and when needed add missing include files directly. Acked-by: Jason Liu Acked-by: Peng Fan Signed-off-by: Tom Rini

global: Make include

2024-05-06T21:07:48Z

This follows the example of RISC-V where includes directly as "gd" includes a reference to bd_info already and so the first must include the second anyhow. We then remove from all of the places which include references to "gd" an so have already. Signed-off-by: Tom Rini