u-boot.git/arch/arm/lib, branch v2019.10

board_f: fix noncached reservation calculation

2019-08-30T18:17:11Z

The current code in reserve_noncached() has two issues: 1) The first update of gd->start_addr_sp always rounds down to a section start. However, the equivalent calculation in cache.c:noncached_init() always first rounds up to a section start, then subtracts a section size. These two calculations differ if the initial value is already rounded to section alignment. 2) The second update of gd->start_addr_sp subtracts exactly CONFIG_SYS_NONCACHED_MEMORY, whereas the equivalent calculation in cache.c:noncached_init() rounds the noncached size up to section alignment before subtracting it. The two calculations differ if the noncached region size is not a multiple of the MMU section size. In practice, one/both of those issues causes a practical problem on Jetson TX1; U-Boot triggers a synchronous abort during initialization, likely due to overlapping use of some memory region. This change fixes both these issues by duplicating the exact calculations from noncached_init() into reserve_noncached(). However, this fix assumes that gd->start_addr_sp on entry to reserve_noncached() exactly matches mem_malloc_start on entry to noncached_init(). I haven't traced the code to see whether it absolutely guarantees this in all (or indeed any!) cases. Consequently, I added some comments in the hope that this condition will continue to be true. Fixes: 5f7adb5b1c02 ("board_f: reserve noncached space below malloc area") Cc: Vikas Manocha Signed-off-by: Stephen Warren

env: Move env_get() to env.h

2019-08-11T20:43:41Z

Move env_get() over to the new header file. Acked-by: Joe Hershberger Signed-off-by: Simon Glass

Merge tag 'efi-2019-10-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

2019-07-24T02:29:53Z

Pull request for UEFI sub-system for v2019.10-rc1 (2) * Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. * Address errors of type -Werror=address-of-packed-member when building with GCC9.1 * Fix an error when adding memory add addres 0x00000000. * Rework some code comments for Sphinx compliance.

spl: Allow performing BSS init early before board_init_f()

2019-07-17T15:12:54Z

On some platform we have sufficient memory available early on to allow setting up and using a basic BSS prior to entering board_init_f(). Doing so can for example be used to carry state over to board_init_r() without having to resort to extending U-Boot's global data structure. To support such scenarios add a Kconfig option called CONFIG_SPL_EARLY_BSS to allow moving the initialization of BSS prior to entering board_init_f(), if enabled. Note that using this option usually should go along with using CONFIG_SPL_SEPARATE_BSS and configuring BSS to be located in memory actually available prior to board_init_f(). Signed-off-by: Andreas Dannenberg

efi_loader: use predefined constants in crt0_*_efi.S

2019-07-16T22:17:14Z

We should use predefined constants instead of magic numbers. Move some constant definitions from include/pe.h to include/asm-generic/pe.h. Use these constants in crt0_*_efi.S. Signed-off-by: Heinrich Schuchardt

arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET

2019-07-10T13:37:23Z

By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not giving a prompt to it. The only way to define it is to hard-code an extra entry in SoC/board Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig. Add a prompt to it in order to allow defconfig files to specify the value of CONFIG_SYS_INIT_SP_BSS_OFFSET. With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible. So, we need a new bool option to turn it off by default. I move the 'default 524288' to the common place. This value is not too big, but is big enough to avoid the overwrap of DT in most platforms. If 512KB is not a suitable choice for your platform, you can change it from your defconfig or menuconfig etc. Signed-off-by: Masahiro Yamada Acked-by: Stephen Warren

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

2019-05-18T12:15:35Z

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin Signed-off-by: Trevor Woerner [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini

arm: zimage: add barebox image magic number

2019-05-10T00:21:59Z

For chainboot configurations or test environments, this patch allows booting barebox images by using command bootz. Signed-off-by: Christoph Fritz

arm: add a separate stack for TPL

2019-05-08T09:34:12Z

TPL stack may different from SPL and sys stack, add support for separate one when the board defines it. Signed-off-by: Kever Yang

arm: remove ARCH_ROCKCHIP macro in common code

2019-05-08T09:34:12Z

This is fix to: e2a12f590d rockchip: use 'arch-rockchip' as header file path The V2 of origin patch set has fix this, but we merge V1 by mistake, so lets correct it. Signed-off-by: Kever Yang