u-boot.git/arch/arm/mach-bcmbca, branch master

arm: dts: Use upstream dts for additional bcmbca devices

2025-01-21T15:28:05+00:00

Make use of OF_UPSTREAM which uses Linux dts.

Changes in v2:
- Removed enabling of nand functionality

Signed-off-by: david degan 
Reviewed-by: William Zhang 
Reviewed-by: Anand Gore

arm: dts: Use upstream dts

2024-11-26T20:14:44+00:00

Make use of OF_UPSTREAM which uses Linux dts.

Signed-off-by: david regan 
Reviewed-by: Linus Walleij 
Reviewed-by: Sumit Garg 
Reviewed-by: William Zhang 
Reviewed-by: Anand Gore

board: bcm96846: Switch to using OF_UPSTREAM

2024-10-12T16:10:57+00:00

This board clearly develops first in Linux which had more
hardware listed, so let's start to use OF_UPSTREAM.
This makes the NAND driver work.

Suggested-by: Neil Armstrong 
Signed-off-by: Linus Walleij

drivers: nand: bcmbca: Enable on BCM6846

2024-10-12T16:10:56+00:00

The BCM6846 has the BRCMBCA NAND controller so enable
it.

Reviewed-by: Michael Trimarchi 
Signed-off-by: Linus Walleij

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

arm: bcm: Remove and add needed includes

2024-05-06T21:06:34+00:00

Remove  from all mach-bcmbca, mach-bcm283x and bcm* CPU
directory files and when needed add missing include files directly.

Signed-off-by: Tom Rini

timer: bcmbca: use arm global timer for bcm63138 SoC

2022-10-31T12:56:00+00:00

As STI timer is renamed to ARM A9 global timer, change BCM63138 to use
the new global timer config symbol name.

This patch applies on top of the my previous patch [1].

[1]: https://lists.denx.de/pipermail/u-boot/2022-August/491060.html

Signed-off-by: William Zhang

arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:55:59+00:00

BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:55:51+00:00

BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes