u-boot.git/arch/arm/mach-imx/mx6, branch master

imx6: clock: allow different clock sources for ldb

2026-06-27T02:02:46Z

The LDB clock sources don't have to be the same, so allow DI1 clock to be configured separately. Unlikely to be significant, but the reason will become apparent in the following commit. Signed-off-by: Brian Ruley

Kconfig: arm: restyle

2026-06-25T20:06:18Z

Restyle all Kconfigs for "arm": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker Reviewed-by: Tom Rini

board: tq: add TQMa6UL[L]x[L] SOM and MBa6ULx baseboard

2026-06-05T11:58:43Z

The TQMa6UL[L]x is a family of SoMs based on the i.MX6UL[L] SoCs. They are available either with board connectors or as LGA packages with solder balls. Add Support for the SoM and its combination with our MBa6ULx carrier board. For use with the MBa6ULx carrier board, the LGA variant is soldered onto an adapter board. Signed-off-by: Nora Schiffer Signed-off-by: Max Merchel

arm: mx6: module_fuse: update node path for Linux 6.13

2026-05-15T20:31:39Z

Update node path for 5.10 Kernel. - aips-bus renamed to bus - gpmi-nand renamed to nand-controller cherry picked from https://github.com/nxp-imx/uboot-imx, tag lf-6.12.3-1.0.0, commit feb8178e97d4 ("LF-2637 mx6: fuse: update node path") add changes node path for Linux 6.13 Signed-off-by: Peng Fan Signed-off-by: Max Merchel

sata: Rework the CMD_SATA and SATA symbols

2026-04-03T18:06:14Z

Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini

mx6sxsabreauto: Drop unnecessary BOARD_EARLY_INIT_F usage

2026-04-02T12:09:51Z

This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a do-nothing board_early_init_f function. Change to not enabling the option and so not needing an empty function. Signed-off-by: Tom Rini Reviewed-by: Peng Fan

board: nxp: Rename board directory from board/freescale to board/nxp

2026-01-28T06:26:50Z

This patch renames the board directory from board/freescale to board/nxp because NXP now provides Board Support Packages (BSPs) and tools for the former Freescale i.MX and other i.MX products. All relevant references have been updated accordingly. This change does not affect functionality. Signed-off-by: Alice Guo Reviewed-by: Fabio Estevam

imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments

2025-10-30T15:40:15Z

The change in commit c1af358cf51a ("imx: mx6ull: fix REFTOP_VBGADJ setting") is not correct. According to latest i.MX6ULL fuse table, the REFTOP_TRIM[2:0] fuse is defined as below. So the previous codes are correct, only need to fix the comments. Set the REFTOP_VBGADJ field in PMU_MISC0 register based on the REFTOP_TRIM fuse: '000" - set REFTOP_VBGADJ[2:0] to 3'b000 '001" - set REFTOP_VBGADJ[2:0] to 3'b001 '010" - set REFTOP_VBGADJ[2:0] to 3'b010 '011" - set REFTOP_VBGADJ[2:0] to 3'b011 '100" - set REFTOP_VBGADJ[2:0] to 3'b100 '101" - set REFTOP_VBGADJ[2:0] to 3'b101 '110" - set REFTOP_VBGADJ[2:0] to 3'b110 '111" - set REFTOP_VBGADJ[2:0] to 3'b111 Sven Schwermer reported: "These are the symptoms: Very few of the thousands of devices that we manufacture (< 1%) fail to decompress a large XZ archive once in Linux userspace. We have not found any form of memory testing or other load that reproduces this issue. Reverting the offending patch fixes this behavior on the affected devices." Revert the offending commit to fix the regression. Reported-by: Sven Schwermer Signed-off-by: Ye Li [fabio: Fixed checkpatch warning and added Sven's report] Signed-off-by: Fabio Estevam Reviewed-by: Tom Rini

global: Make ARCH_MISC_INIT a selected symbol

2025-07-11T17:33:25Z

This symbol is not something that the user should be enabling or disabling but rather the developer for a particular board should select it when required. This is mostly size neutral, however a few places do have changes. In the case of i.MX6ULL systems, it is always the case that arch_misc_init() could call setup_serial_number() and do useful work, but was not enabled widely, but now is. In the case of i.MX23/28 systems, we should be able to call mx28_fixup_vt() again here, so do so. Finally, some platforms were calling arch_misc_init() and then not doing anything and this results in removing the option. Acked-by: Peng Fan Signed-off-by: Tom Rini

env: Rename SYS_MMC_ENV_PART to ENV_MMC_EMMC_HW_PARTITION

2025-06-20T18:15:08Z

Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Use ENV_MMC_EMMC_HW_PARTITION to clarify this is the eMMC hardware partition selector, not a software partition table entry selector. Retain the ENV_MMC_ prefix to make it easier to search for all the SD/MMC related ENV options. Update the help text accordingly. Signed-off-by: Marek Vasut