u-boot.git/arch/arm/mach-imx, branch master

imx9: scmi: use 48-bit MAC add instead of incrementing mac[5]

2026-06-26T19:50:55Z

Replace mac[5] += offset with a proper 48-bit MAC address add to avoid overflow issues when mac[5] was close to 255. Example: i.MX95 MAC2: 00:11:22:33:44:FE + 6 Old: 00:11:22:33:44:04 (overflow, wraps to 0) New: 00:11:22:33:45:04 (correct carry from mac[5] to mac[4]) Signed-off-by: Alice Guo Signed-off-by: Ye Li Reviewed-by: Peng Fan

imx9: scmi: Correct shutdown checking

2026-06-26T19:50:55Z

The shutdown checking should use shutdown flags, not bootflags. Signed-off-by: Ye Li Signed-off-by: Peng Fan

imx9: scmi: Fix SPL trampoline buffer for 1GB DDR

2026-06-26T19:50:55Z

After supporting get DRAM size from SM, the trampoline buffer address still depends on PHYS_SDRAM_SIZE. If the real DDR size is less than PHYS_SDRAM_SIZE, the trampoline buffer address is invalid and SPL will crash. So use board_phys_sdram_size to get real DDR size to calculate correct address. Fixes: e1cc7117b630 ("imx9: scmi: Get DDR size through SM SCMI API") Signed-off-by: Ye Li Reviewed-by: Peng Fan Tested-by: Emanuele Ghidoli

board: toradex: add Toradex Verdin iMX95

2026-04-21T23:49:39Z

Add support for the Toradex Verdin iMX95. Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Emanuele Ghidoli Co-developed-by: Ernest Van Hoecke Signed-off-by: Ernest Van Hoecke Co-developed-by: Francesco Dolcini Signed-off-by: Francesco Dolcini Reviewed-by: Simon Glass

imx: imx9: Select ARCH_MISC_INIT for all i.MX9 SoCs

2026-04-21T23:49:39Z

Instead of adding select ARCH_MISC_INIT for each i.MX 9x SoC, select it at the i.MX9 family Kconfig level. The corresponding arch_misc_init() is already defined in the common arch/arm/mach-imx/imx9/soc.c file and will print out ELE firmware BuildInfo for all i.MX9 SoCs now instead of just i.MX91 and i.MX95. Signed-off-by: Primoz Fiser Reviewed-by: Peng Fan

board: tqma7: add code for u-boot with spl

2026-04-21T23:49:39Z

The TQMa7x is a SoM family with a pluggable board connector based on the i.MX7 SoCs. Add support for the SoM and its combination with our MBa7x carrier board. Acked-by: Peng Fan Signed-off-by: Alexander Feilke

sata: Rework the CMD_SATA and SATA symbols

2026-04-03T18:06:14Z

Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini

arm: dts: imx95-toradex-smarc: migrate to OF_UPSTREAM

2026-04-02T12:11:08Z

Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for the Toradex SMARC iMX95. Remove the now obsolete device tree files: - imx95-toradex-smarc-dev.dts - imx95-toradex-smarc.dtsi Signed-off-by: Franz Schnyder

mx6sxsabreauto: Drop unnecessary BOARD_EARLY_INIT_F usage

2026-04-02T12:09:51Z

This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a do-nothing board_early_init_f function. Change to not enabling the option and so not needing an empty function. Signed-off-by: Tom Rini Reviewed-by: Peng Fan

board: phytec: phycore-imx91-93: Add phyCORE-i.MX91 support

2026-04-02T12:05:23Z

As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it to the existing board-code "phycore_imx93", and rename that board to "phycore_imx91_93" to reflect the dual SoCs support. While at it, also rename and change common files accordingly. This way i.MX91 and i.MX93 SoC variants of the phyCORE SoM share most of the code and documentation without duplication, while maintaining own device-tree and defconfigs for each CPU variant. Supported features: - 1GB LPDDR4 RAM - Debug UART - EEPROM - eMMC - Ethernet - SD-card - USB Product page SoM: [1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ Signed-off-by: Primoz Fiser