update part number for STM32MP251/3 for last cut revision.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Factorize TAMP_FWU_BOOT_IDX_MASK and TAMP_FWU_BOOT_IDX_OFFSET
definition which are common to STM32MP1 and STM32MP2 SoCs family.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

STM32MP21 application processors (STM32 MPUs) based on a single
Arm Cortex®-A35 core running up to 1.5 GHz and Cortex®-M33 core
running at 300 MHz.

It is pin-compatible with the STM32MP2 series in the VFBGA361
10×10 mm package: the STM32MP21 uses a subset of the STM32MP23
pinout, which itself is a subset of the STM32MP25.

More details available here :
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

No more need to test if a fsbl partition is present on NOR when booting
from serial or USB. Now MTD devices are automatically populated with
partition information found in DT. Remove fsbl_nor_detected boolean from
stm32prog_data struct and all code using it.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Following the 'commit 95b5a7de30f6 ("FWU: STM32MP1: Add support to
read boot index from backup register")', this patch enables reading
the boot index from backup registers on STM32MP2 platforms.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Replace RIFSC check access APIs by grant/release access ones that handle
the RIF semaphores.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Cosmetic update to replace space by tab in sys_proto.h

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Add STM32MP23 support which is a cost optimized of STM32MP25.
More details available at:
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Add hardware initialization for the STM32MP13xx in SPL. This is
similar to STM32MP15xx except the code has to enable MCE to bring
DRAM controller up later.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>

Add support for STM32MP25 SoC.
Identification and hardware configuration registers allow to read the
timer version and capabilities (counter width, ...).
So, rework the probe to avoid touching ARR register by simply read the
counter width when available. This may avoid messing with a possibly
running timer.
Also add useful bit fields to stm32-timers header file.

Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>