commit 0d479b53 (Aneesh V) added code for OMAP4 that doesn't
execute on Tegra, due to the AVP (ARM7TDI) not having a CP15.
Result was an undefined instruction hang just after reset.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Acked-by: Aneesh V <aneesh@ti.com>

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Gerald van Baren <gvb.uboot@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>

Hello

This patch adds support for "print_cpuinfo" on Samsung s3c24x0
based targets. If activated by "#define CONFIG_DISPLAY_CPUINFO", the
chip ID and the 3 main cpu frequencies will be displayed.

Dave

Signed-off-by: David Müller <d.mueller@elsoft.ch>

During misc_init_r, make sure to setup the clocks
properly for the USB hub on the pandaboard.  With
this in place, the USB hub and the ethernet works
on the pandaboard.

Signed-off-by: Chris Lalancette <clalancette@gmail.com>
Acked-by: Aneesh V <aneesh@ti.com>

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>

Commit 2f3427c added noop cache functions implementation for arm926ejs
to fix compilation of drivers depending on these functions (DaVinci
EMAC in particular).

Unfortunately, the bug was introduced: noop implementation calls
dcache_disable which calls flush_dcache_all which in turn calls
dcache_disable thus creating an infinite loop.

This patch removes noop implementation for flush_dcache_all, we already
have default one in arch/arm/lib/cache.c and it should be used instead.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Tested-by: Matthias Weisser <weisserm@arcor.de>

Fix trailing white space, indentation by spaces instead of TABs,
excessive blank lines, trailing blank lines.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This commit enables support for USB Gadgets on the Exynos4210 (C210 Universal)
reference target.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
CC: Remy Bohmer <linux@bohmer.net>

* 'master' of git://git.denx.de/u-boot-usb:
  USB: efikamx: Enable USB on EfikaMX and EfikaSB
  USB: Add generic ULPI layer and a viewport
  USB: EHCI: Allow EHCI post-powerup configuration in board files
  USB: mx51evk: add end enable USB host support on port 1
  USB: mx53loco: add end enable USB host support on port 1
  USB: MX5: Add MX5 usb post-init callback
  USB: MX5: Abstract out mx51 USB pixmux configuration
  USB: MX5: add generic USB EHCI support for mx51 and mx53
  USB: MX5: add helper functions to enable USB clocks
  usb:gadget:s5p Enable the USB Gadget framework at GONI
  usb:gadget:s5p USB Device Controller (UDC) implementation
  ehci: speed up initialization
  usb: add help for missing start subcommand
  cosmetic: remove excess whitespace from usb command help
  usb: align usb_endpoint_descriptor to 16-bit boundary
  usbtty: init endpoints prior to startup events
  pxa: convert pxa27x_udc to use read and write functions
  pxa: activate the first usb host port on pxa27x by default
  pxa: fix usb host register mismatch
  ehci-fsl: correct size of ehci caplength
  USB: Add usb_event_poll() to get keyboards working with EHCI
  USB: gadaget: add Marvell controller support
  USB: Fix complaints about strict aliasing in OHCI-HCD
  USB: Drop dead code from usb_kbd.c
  USB: Rework usb_kbd.c
  USB: Add functionality to poll the USB keyboard via control EP

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>

V2: Fix spacing in crm_regs.h