u-boot.git/arch/arm, branch v2022.10

imx8mn-ddr4-evk-u-boot: Fix broken boot

2022-10-03T17:38:42Z

When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam

imx8mn-venice-u-boot: Fix broken boot

2022-10-03T17:38:22Z

ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlock

2022-09-20T16:30:02Z

Pull this LPGPR unlock into common code, since it is used in multiple systems already. Signed-off-by: Marek Vasut

arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsi

2022-09-20T16:30:02Z

The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: 24a7a3c1c042 ("imx8mm: synchronise device tree with linux") Signed-off-by: Tim Harvey

arm: dts: imx8mp-venice-gw74xx: add dsa phy handles to u-boot dtsi

2022-09-20T16:30:02Z

The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: e0caa84ca685 ("imx8mp: synchronise device tree with linux") Signed-off-by: Tim Harvey

bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards

2022-09-18T20:56:18Z

Introduce BSH SystemMaster (SMM) M2 board family, which consists of: imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards. Add support for imx6ulz BSH SMM M2 board: - 128 MiB DDR3 RAM - 256MiB Nand - USBOTG1 peripheral - fastboot. Signed-off-by: Michael Trimarchi Reviewed-by: Fabio Estevam

board: purism: add the Purism Librem5 phone

2022-09-18T20:56:10Z

Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie Co-developed-by: Sebastian Krzyszkowiak Signed-off-by: Sebastian Krzyszkowiak Reviewed-by: Fabio Estevam

ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM

2022-09-18T20:56:10Z

Fix copy-paste error of the I2C5 bus recovery GPIO assignment, the I2C5 GPIOs are on gpio3 instead of gpio5. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: uboot-imx

ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM

2022-09-18T20:56:10Z

The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: uboot-imx

ARM: dts: imx: Rename imx8mp-dhcom{-pdk2,}-boot.dtsi

2022-09-18T20:56:10Z

Rename imx8mp-dhcom-pdk2-u-boot.dtsi to imx8mp-dhcom-u-boot.dtsi, since this file is shared by PDK2, PicoITX and DRC02. No functional change. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: uboot-imx