u-boot.git/arch/arm, branch v2024.10

ARM: stm32: Fix secure_waitbits() mask check

2024-09-25T17:40:46Z

Do not apply bitwise AND to register value and expected value, only apply bitwise AND to register value and mask, and only then compare the result with expected value that the function polls for. Fixes: b49105320a5b ("stm32mp: psci: Implement PSCI system suspend and DRAM SSR") Signed-off-by: Marek Vasut

ARM: stm32: Fix TAMP_SMCR BKP..PROT fields on STM32MP15xx

2024-09-25T17:40:27Z

Update the TAMP_SMCR BKP..PROT fields to put first 10 registers into protection zone 1 and next 5 into zone 2. This fixes use of boot counter which is often in zone 3 and has to be updated from Linux, which runs in NS. Fixes: 73f7fc944cf6 ("ARM: stm32: Initialize TAMP_SMCR BKP..PROT fields on STM32MP15xx") Signed-off-by: Marek Vasut Reviewed-by: Patrice Chotard

dts: beagleboneai64: Add boothph in chipid node

2024-09-21T00:08:34Z

beagleboneai64 boot was broken after OF_UPSTREAM support for J721E SOC. So add bootph in chipid node similar to other boards of this SOC. Fixes: 46bb1405b461 ("arm: dts: k3-j721e: Move to OF_UPSTREAM") Reported-by: Robert Nelson Signed-off-by: Udit Kumar

imx8mq-u-boot: Pass FIT offset to fix boot regression

2024-09-10T00:52:15Z

Since commit 37e50627efac ("ARM: dts: imx: Convert i.MX8M flash.bin image generation to binman") the imx8mq-evk fails to boot: U-Boot SPL 2024.10-rc4 (Sep 09 2024 - 16:08:22 -0300) PMIC: PFUZE100 ID=0x10 SEC0: RNG instantiated Normal Boot Trying to boot from MMC2 Fix it by passing the offset property for the FIT image, just like it is done on i.MX8MM. Fixes: 37e50627efac ("ARM: dts: imx: Convert i.MX8M flash.bin image generation to binman") Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan Acked-by: Marek Vasut

ARM: dts: renesas: Minimize R8A779G0 V4H RPC SPI DT node

2024-09-08T23:10:44Z

The RPC SPI DT node is now part of mainline Linux DT, remove the duplicate content from U-Boot DT extras. The SPI flash DT node name has been changed from "spi-flash@0" to "flash@0", reflect this change in this patch. Retain "bank-width" and "num-cs" DT properties which are used by U-Boot. Retain "spi-rx-bus-width" and "spi-tx-bus-width" DT properties to indicate the bus should always be operated in 1-1-1 mode as the U-Boot RPC SPI driver does not support higher bus width modes yet. Signed-off-by: Marek Vasut

arm: mvebu: turris_omnia: Use the i2c_eeprom misc driver for EEPROM reading in U-Boot proper

2024-09-03T12:24:32Z

Use the i2c_eeprom miscellaneous driver for reading Turris Omnia EEPROM in U-Boot proper. Keep using dm_i2c_read() in SPL build, since adding the i2c_eeprom driver to SPL build increases the image by 1.5 KiB. Signed-off-by: Marek Behún Reviewed-by: Stefan Roese

mach-imx: do not use if_changed more than once per target

2024-08-29T11:34:46Z

doc/develop/makefiles.rst has the following note: if_changed should not be used more than once per target. It stores the executed command in a corresponding .cmd file and multiple calls would result in overwrites and unwanted results when the target is up to date and only the tests on changed commands trigger execution of commands. The mach-imx Makefile does not follow this recommandation, so fix it by implementing a single command that performs both the cpp_cfg and imx9_check actions. This change fixes an issue with "tools/buildman/buildman imx8ulp_evk" failing every other time [1]. [1] https://lists.denx.de/pipermail/u-boot/2024-August/563192.html Fixes: f637dfe8c468 ("mach-imx: Add i.MX93 binman support.") Signed-off-by: Jerome Forissier

imx6-tqma6: Convert to OF_UPSTREAM

2024-08-13T12:31:04Z

Instead of using the local imx6-tqma6 devicetree copies from U-Boot, convert the imx6-tqma6 target to OF_UPSTREAM so that the upstream kernel devicetrees can be used instead. Signed-off-by: Fabio Estevam

tqma6q_mba6: Convert to watchdog driver model

2024-08-13T12:30:44Z

Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam

imx: imx8: fix build when CONFIG_IMX_BOOTAUX is set

2024-08-13T11:28:24Z

Use correct function name. Fixes: e8cd1f60d964 ("imx: imx8: bootaux: Add i.MX8 M4 boot support") Signed-off-by: Max Krummenacher