u-boot.git/arch/microblaze/cpu/u-boot.lds, branch main

microblaze: Update linker scripts to ensure appended device tree is aligned

2026-01-20T18:07:15Z

With commit 0535e46d55d7 ("scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c") it is now a fatal error to U-Boot if our device tree is not 8-byte aligned. In commit 85f586035d75 ("ARM: OMAP2+: Pad SPL binary to 8-byte alignment before DTB") Beleswar Padhi explains that we must have ALIGN(x) statements inside of a section to ensure that padding is included and not simply that the linker address counter is incremented. To that end, this patch: - Aligns the final section before _end (for U-Boot) or _image_binary_end (for xPL phases) by 8-bytes by adjusting the ALIGN(4) statement to be ALIGN(8) in the final section before the symbol. - Ensure that we do have alignment by adding an ASSERT so that when not aligned we fail to link (and explain why). Tested-by: Michal Simek Reviewed-by: Ilias Apalodimas Signed-off-by: Tom Rini

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

2022-06-27T14:15:50Z

Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location

microblaze: Add support for run time relocation

2022-06-24T12:15:01Z

Microblaze is using NEEDS_MANUAL_RELOC from the beginnging. This is causing issues with function pointer arrays which need to be updated manually after relocation. Building code with -fPIC and linking with -pic will remove this limitation and there is no longer need to run manual update. By default still old option is enabled but by disabling NEEDS_MANUAL_RELOC code will be compiled for full relocation. The patch does couple of things which are connected to each other. - Define STATIC_RELA dependency to call relocate-rela to fill sections. - REMAKE_ELF was already enabled but u-boot file can't be used because sections are empty. relocate-rela will fill them and output file is u-boot.elf which should be used. - Add support for full relocation (u-boot.elf) - Add support for early relocation when u-boot.bin is loaded to different address then CONFIG_SYS_TEXT_BASE - Add rela.dyn and dynsym sections Disabling NEEDS_MANUAL_RELOC U-Boot size increased by 10% of it's original size (550kB to 608kB). Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/a845670b34925859b2e321875f7588a29f6655f9.1655299267.git.michal.simek@amd.com

linker_lists: Rename sections to remove . prefix

2022-06-23T16:58:18Z

Rename the sections used to implement linker lists so they begin with '__u_boot_list' rather than '.u_boot_list'. The double underscore at the start is still distinct from the single underscore used by the symbol names. Having a '.' in the section names conflicts with clang's ASAN instrumentation which tries to add redzones between the linker list elements, causing expected accesses to fail. However, clang doesn't try to add redzones to user sections, which are names with all alphanumeric and underscore characters. Signed-off-by: Andrew Scull Reviewed-by: Simon Glass

microblaze: u-boot.lds: replace __end symbol with _end

2022-01-05T09:22:02Z

board_fdt_blob_setup() uses the _end symbol to find the dtb in the non-spl case. In order to allow microblaze builds to compile successfully with CONFIG_OF_SEPARATE, the _end symbol must be defined. Align microblaze with the other architectures and use _end symbol rather than __end to mark the end of the u-boot binary. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20211130163358.2531677-2-ovidiu.panait@windriver.com Signed-off-by: Michal Simek

microblaze: Enable GCC garbage collector for full U-Boot

2020-11-20T09:42:53Z

GCC's garbage collector works for Microblaze for quite a long time but none has enabled it. The same change has be done for example by commit fac4790491f6 ("arc: Eliminate unused code and data with GCC's garbage collector"). Before: text data bss dec hex filename 588760 33592 39192 661544 a1828 u-boot After: text data bss dec hex filename 504504 32164 38608 575276 8c72c u-boot Which saves almost 15% of memory footprint. Also group symbols/functions to proper section. Reported-by: Tom Rini Signed-off-by: Michal Simek

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

microblaze: Move architecture to use generic board init

2015-02-09T14:11:56Z

Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek

microblaze: Remove unneeded data section adding from DTB

2015-02-09T14:09:57Z

DTB is added to rodata section: [ 2] .rodata PROGBITS 84c5b60c 05c60c 00c618 00 A 0 0 4 [ 3] .dtb.init.rodata PROGBITS 84c67c30 068c30 003c80 00 A 0 0 16 [ 4] .rela.dyn RELA 84c6b8b0 06c8b0 000534 0c A 0 0 4 [ 5] .data PROGBITS 84c6bde4 06cde4 001536 00 WA 0 0 16 Signed-off-by: Michal Simek

Makefile: rename all libraries to built-in.o

2013-11-17T19:11:32Z

Signed-off-by: Masahiro Yamada