u-boot.git/arch/microblaze/include/asm, branch v2023.01

Convert CONFIG_SYS_BOOT_RAMDISK_HIGH to Kconfig

2022-07-07T18:01:09Z

This converts the following to Kconfig: CONFIG_SYS_BOOT_RAMDISK_HIGH Signed-off-by: Tom Rini

microblaze: Remove interrupt handler

2022-06-24T12:16:32Z

The primary purpose for this code was timer. By converting it to CONFIG_TIMER there is no code which uses this implementation that's why remove it. If there is a need to handle interrupts this patch can be reverted in future. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/5f2decc5a30a5678490ebde26d8c6f5a5f873cda.1654684731.git.michal.simek@amd.com

microblaze: Convert axi timer to DM driver

2022-06-24T12:16:32Z

Move axi timer driver from Microblaze to generic location. Origin implementation was irq based with counting down timer. CONFIG_TIMER drivers are designed differently that timer is free running up timer with automatic reload without any interrupt. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Michal Simek Tested-by: Ovidiu Panait Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com

cpu: add CPU driver for microblaze

2022-06-24T12:16:00Z

Add a basic CPU driver that retrieves information about the microblaze CPU core. cpu_ops handlers are implemented so that the "cpu" command can work properly: U-Boot-mONStR> cpu list 0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000 U-Boot-mONStR> cpu detail 0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000 ID = 0, freq = 50 MHz: L1 cache, MMU Note: cpu_ver_lookup[] and family_string_lookup[] arrays were imported from linux. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20220531181435.3473549-14-ovpanait@gmail.com Signed-off-by: Michal Simek

microblaze: add support for handling PVR data

2022-06-24T12:16:00Z

Add helper code for PVR (Processor Version Register) data handling. It will be used by the UCLASS_CPU driver to populate cpuinfo fields at runtime. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20220531181435.3473549-13-ovpanait@gmail.com Signed-off-by: Michal Simek

microblaze: cache: introduce cpuinfo structure

2022-06-24T12:16:00Z

Introduce a minimal cpuinfo structure to hold cache related info. The instruction/data cache size and cache line size are initialized early in the boot to default Kconfig values. They will be overwritten with data from PVR/dtb if the microblaze UCLASS_CPU driver is enabled. The cpuinfo struct was placed in global_data to allow the microblaze UCLASS_CPU driver to also run before relocation (initialized global data should be read-only before relocation). gd_cpuinfo() helper macro was added to avoid volatile "-Wdiscarded-qualifiers" warnings when using the pointer directly. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20220531181435.3473549-10-ovpanait@gmail.com Signed-off-by: Michal Simek (s/bralid/brlid/)

microblaze: cache: introduce flush_cache_all()

2022-06-24T12:16:00Z

All flush_cache() calls in microblaze code are supposed to flush the entire instruction and data caches, so introduce flush_cache_all() helper to handle this. Also, provide implementations for flush_dcache_all() and invalidate_icache_all() so that icache and dcache u-boot commands can work. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20220531181435.3473549-9-ovpanait@gmail.com Signed-off-by: Michal Simek

microblaze: Do not place u-boot to reserved memory location

2022-03-07T15:33:47Z

Microblaze can also have reserved space in DT which u-boot has to avoid to placing self to that location. The same change was done in Zynqmp by commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"). This feature was tested with this memory description on kc705: memory { device_type = "memory"; reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; alloc@b00000000 { reg = <0xb0000000 0x10000000>; no-map; }; alloc@a8000000 { reg = <0xa8000000 0x00010000>; no-map; }; }; And in U-Boot log you can check u-boot relocation address and reserved locations. U-Boot 2022.01-03974-gb1b4c2dea9b9 (Feb 25 2022 - 11:59:48 +0100) Model: Xilinx MicroBlaze DRAM: 1 GiB Flash: 128 MiB Loading Environment from nowhere... OK In: serial Out: serial Err: serial Model: Xilinx MicroBlaze Net: AXI EMAC: 40c00000, phyaddr 7, interface gmii eth0: ethernet@40c00000 U-BOOT for microblaze-generic U-Boot-mONStR> bdi ... DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x40000000 ... relocaddr = 0xaff69000 ... lmb_dump_all: memory.cnt = 0x1 memory[0] [0x80000000-0xbfffffff], 0x40000000 bytes flags: 0 reserved.cnt = 0x3 reserved[0] [0xa8000000-0xa800ffff], 0x00010000 bytes flags: 4 reserved[1] [0xafe87bb0-0xafffffff], 0x00178450 bytes flags: 0 reserved[2] [0xb0000000-0xbfffffff], 0x10000000 bytes flags: 4 Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/ea0a8ccce723478eb518f6fdceb91d4f129efb68.1646122398.git.michal.simek@xilinx.com

Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

2022-01-20T14:39:45Z

Pull request doc-2022-04-rc1 Replace @return by Return: in code comments.

doc: replace @return by Return:

2022-01-19T17:11:34Z

Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt