u-boot.git/arch/microblaze/include, branch v2022.07

microblaze: Do not place u-boot to reserved memory location

2022-03-07T15:33:47Z

Microblaze can also have reserved space in DT which u-boot has to avoid to placing self to that location. The same change was done in Zynqmp by commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location"). This feature was tested with this memory description on kc705: memory { device_type = "memory"; reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; alloc@b00000000 { reg = <0xb0000000 0x10000000>; no-map; }; alloc@a8000000 { reg = <0xa8000000 0x00010000>; no-map; }; }; And in U-Boot log you can check u-boot relocation address and reserved locations. U-Boot 2022.01-03974-gb1b4c2dea9b9 (Feb 25 2022 - 11:59:48 +0100) Model: Xilinx MicroBlaze DRAM: 1 GiB Flash: 128 MiB Loading Environment from nowhere... OK In: serial Out: serial Err: serial Model: Xilinx MicroBlaze Net: AXI EMAC: 40c00000, phyaddr 7, interface gmii eth0: ethernet@40c00000 U-BOOT for microblaze-generic U-Boot-mONStR> bdi ... DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x40000000 ... relocaddr = 0xaff69000 ... lmb_dump_all: memory.cnt = 0x1 memory[0] [0x80000000-0xbfffffff], 0x40000000 bytes flags: 0 reserved.cnt = 0x3 reserved[0] [0xa8000000-0xa800ffff], 0x00010000 bytes flags: 4 reserved[1] [0xafe87bb0-0xafffffff], 0x00178450 bytes flags: 0 reserved[2] [0xb0000000-0xbfffffff], 0x10000000 bytes flags: 4 Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/ea0a8ccce723478eb518f6fdceb91d4f129efb68.1646122398.git.michal.simek@xilinx.com

Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

2022-01-20T14:39:45Z

Pull request doc-2022-04-rc1 Replace @return by Return: in code comments.

doc: replace @return by Return:

2022-01-19T17:11:34Z

Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt

microblaze: u-boot.lds: replace __end symbol with _end

2022-01-05T09:22:02Z

board_fdt_blob_setup() uses the _end symbol to find the dtb in the non-spl case. In order to allow microblaze builds to compile successfully with CONFIG_OF_SEPARATE, the _end symbol must be defined. Align microblaze with the other architectures and use _end symbol rather than __end to mark the end of the u-boot binary. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20211130163358.2531677-2-ovidiu.panait@windriver.com Signed-off-by: Michal Simek

lmb: move CONFIG_LMB in Kconfig

2021-04-22T18:09:45Z

Migrate CONFIG_LMB in Kconfig. Signed-off-by: Patrick Delaunay

arch: Move NEEDS_MANUAL_RELOC symbol to Kconfig

2020-11-04T15:13:44Z

CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be able to use compile-time checks to reduce the number of build paths. Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze Reviewed-by: Tom Rini Signed-off-by: Michal Simek

microblaze: Add support for little/big endian in/out api's

2020-09-23T08:31:40Z

Add read/write memory utilities for 16 and 32 bits. Add these api's for both little and big endian systems similar to arm architecture. Signed-off-by: T Karthik Reddy Signed-off-by: Ashok Reddy Soma Signed-off-by: Michal Simek

dma-mapping: add for all architectures

2020-02-20T07:09:54Z

To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada

common: Move enable/disable_interrupts out of common.h

2019-12-02T23:25:01Z

Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

microblaze: Switch to generic bootm implementation

2019-10-08T07:55:11Z

There is no reason to use private code for standard bootm command. Current implementation is also broken and don't support image relocation properly. Switching to generic bootm implementation is fixing these issues. cmdline and bdt bootm subcommands are returning -1 because they are not implemented. Similar change was done long time ago by for example commit 2bb5b638791d ("MIPS: bootm: rework and fix broken bootm code") Signed-off-by: Michal Simek