u-boot.git/arch/microblaze/lib/Makefile, branch master Unnamed repository; edit this file 'description' to name the repository. Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" 2024-04-18T14:29:35+00:00 Tom Rini trini@konsulko.com 2024-04-18T14:29:35+00:00 cdd20e3f66fe910da0545d3615decf511519b4a6 As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com> 
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.

This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.

Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/
Signed-off-by: Tom Rini <trini@konsulko.com>
treewide: Make arch-specific bootm code depend on BOOTM 2024-04-10T23:04:25+00:00 Simon Glass sjg@chromium.org 2023-12-15T04:19:02+00:00 6be5ec948b7f6f9e771dee4f5a7bc1c150ebef04 Allow these functions to be compiled in when CONFIG_BOOTM is enabled, even if CONFIG_CMD_BOOTM is not. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Angelo Dureghello <angelo@kernel-space.org> 
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
microblaze: add arch_print_bdinfo() implementation 2022-09-13T09:32:48+00:00 Ovidiu Panait ovpanait@gmail.com 2022-08-29T17:02:05+00:00 f459986e86458a9980a3d0f4de1d4a44a549c00c Allow bdinfo command to print icache/dcache information: U-Boot-mONStR> bdinfo boot_params = 0x00000000 DRAM bank = 0x00000000 -> start = 0x04000000 -> size = 0x04000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 baudrate = 9600 bps relocaddr = 0x07f76000 reloc off = 0x02f76000 Build = 32-bit current eth = unknown ethaddr = (not set) IP addr = <NULL> fdt_blob = 0x07fec7e0 new_fdt = 0x00000000 fdt_size = 0x00000000 lmb_dump_all: memory.cnt = 0x1 memory[0] [0x4000000-0x7ffffff], 0x04000000 bytes flags: 0 reserved.cnt = 0x1 reserved[0] [0x7e94b8c-0x7ffffff], 0x0016b474 bytes flags: 0 devicetree = embed icache = 32 KiB icache line = 4 Bytes dcache = 32 KiB dcache line = 4 Bytes Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Link: https://lore.kernel.org/r/20220829170205.1274484-4-ovpanait@gmail.com Signed-off-by: Michal Simek <michal.simek@amd.com> 
Allow bdinfo command to print icache/dcache information:
U-Boot-mONStR> bdinfo
boot_params = 0x00000000
DRAM bank   = 0x00000000
-> start    = 0x04000000
-> size     = 0x04000000
flashstart  = 0x00000000
flashsize   = 0x00000000
flashoffset = 0x00000000
baudrate    = 9600 bps
relocaddr   = 0x07f76000
reloc off   = 0x02f76000
Build       = 32-bit
current eth = unknown
ethaddr     = (not set)
IP addr     = <NULL>
fdt_blob    = 0x07fec7e0
new_fdt     = 0x00000000
fdt_size    = 0x00000000
lmb_dump_all:
 memory.cnt  = 0x1
 memory[0]      [0x4000000-0x7ffffff], 0x04000000 bytes flags: 0
 reserved.cnt  = 0x1
 reserved[0]    [0x7e94b8c-0x7ffffff], 0x0016b474 bytes flags: 0
devicetree  = embed
icache      = 32 KiB
icache line = 4 Bytes
dcache      = 32 KiB
dcache line = 4 Bytes

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220829170205.1274484-4-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07T13:34:12+00:00 Tom Rini trini@konsulko.com 2018-05-06T21:58:06+00:00 83d290c56fab2d38cd1ab4c4cc7099559c1d5046 When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
microblaze: Move architecture to use generic board init 2015-02-09T14:11:56+00:00 Michal Simek michal.simek@xilinx.com 2014-05-08T14:08:44+00:00 e945f6dc2814f5f0d30b5b7e23821b3fd4faff5b Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze: convert makefiles to Kbuild style 2013-10-31T17:26:45+00:00 Masahiro Yamada yamada.m@jp.panasonic.com 2013-10-21T02:53:30+00:00 a71a36f69200d5f515954035b0595ba6dbf707f6 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com> 
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24T13:44:38+00:00 Wolfgang Denk wd@denx.de 2013-07-08T07:37:19+00:00 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM 2013-07-16T22:44:30+00:00 Dirk Eibach eibach@gdsys.de 2013-06-26T13:55:16+00:00 b8eee4354f33b9810d929b6f7df74238b538e5a8 MAKEALL is fine for ppc4xx and mpc85xx. Run checks were done on our controlcenterd hardware. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Andy Fleming <afleming@freescale.com> 
MAKEALL is fine for ppc4xx and mpc85xx.
Run checks were done on our controlcenterd hardware.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Andy Fleming <afleming@freescale.com>
microblaze: Add muldi3.c which contains routines for _muldi3 2013-02-04T11:07:09+00:00 David Holsgrove david.holsgrove@xilinx.com 2012-11-06T13:01:24+00:00 2281ba5172b2855ed3af2251832332b3e9e16f6c Referenced arch/blackfin/lib/muldi3.c and the linux kernel. Resolves issue seen when building u-boot for HW_MUL=0; PLATFORM_CPPFLAGS += -mxl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-multiply-high which resulted in error while linking to libgcc.a without mul hw (bs / m); libgcc.a(_muldi3.o): In function `__muldi3': .... src/gcc-4.6.2/libgcc/libgcc2.c:550: undefined reference to `_GLOBAL_OFFSET_TABLE_' This link failure would not occur if we used gcc instead of ld directly, as gcc will correctly use the crt's to resolve this link. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Referenced arch/blackfin/lib/muldi3.c and the linux kernel.
Resolves issue seen when building u-boot for HW_MUL=0;

PLATFORM_CPPFLAGS += -mxl-soft-mul
PLATFORM_CPPFLAGS += -mno-xl-multiply-high

which resulted in error while linking to libgcc.a without mul hw (bs / m);

libgcc.a(_muldi3.o): In function `__muldi3':
.... src/gcc-4.6.2/libgcc/libgcc2.c:550: undefined reference to `_GLOBAL_OFFSET_TABLE_'

This link failure would not occur if we used gcc instead of ld directly, as
gcc will correctly use the crt's to resolve this link.

Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze: Move __udelay implementation 2012-07-10T09:54:06+00:00 Michal Simek monstr@monstr.eu 2012-06-29T11:42:28+00:00 779bf42c2a278b2a2f8a4d9e4869c237d0a8742a Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org> 
Move __udelay to the timer code because of unification.
And clean coding style because of checkpatch.pl.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>