u-boot.git/arch/mips/dts, branch v2018.11

mips: mt7628a.dtsi: Add SPI clock-frequency property

2018-09-23T12:27:51Z

This patch adds the clock-frequency property to the SPI controller DT node. It will be used by the SPI driver to calculate the baud rate. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: mt76xx: Add sysreset support

2018-09-23T12:27:51Z

This patch adds the necessary sysreset DT node and enables the required drivers via Kconfig. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: Add Gardena Smart-Gateway board support

2018-09-23T12:27:51Z

The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage. This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck

mips: Add LinkIt Smart 7688 support

2018-09-23T12:27:19Z

The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM and 32 MiB of flash (SPI NOR). This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck

mips: Add basic MediaTek MT7620/88 support

2018-09-22T19:18:33Z

This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of the code is copied from the MediaTek GitHub repository: https://github.com/MediaTek-Labs/linkit-smart-uboot.git The mt7628a.dtsi file is imported from Linux v4.17. Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway both based on the MT7688 will be added in further patches. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

dt: bcm6838: add pinctrl

2018-09-22T18:49:59Z

Add pinctrl node and related syscon node for broadcom bcm6838 SoC. Signed-off-by: Philippe Reynes

bcm968380gerg: add initial support

2018-08-08T11:38:17Z

This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: Philippe Reynes Reviewed-by: Daniel Schwierzeck

bcm6838: add initial support

2018-08-08T11:38:17Z

This adds the initial support of the Broadcom BCM6838 SoC familly, only cpu, dram, uart and leds are supported. Signed-off-by: Philippe Reynes Reviewed-by: Daniel Schwierzeck

.gitignore: move .dtb and .dtb.S patterns to the top-level .gitignore

2018-06-18T18:43:12Z

Follow Linux commit 10b62a2f785a (".gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore"). Signed-off-by: Masahiro Yamada

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini