u-boot.git/arch/mips/include/asm, branch v2015.01

Replace with

2014-12-08T14:35:46+00:00

Including  is enough for general use.

Signed-off-by: Masahiro Yamada

common/board_f: Initialized global data for generic board

2014-05-12T19:20:05+00:00

Some platforms (tested on mpc85xx, mpc86xx) use global data before calling
function baord_inti_f(). The data should not be cleared later. Any arch
which uses global data in generic board board_init_f() should define
CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: York Sun 
CC: Scott Wood 
CC: Simon Glass 
CC: Albert ARIBAUD 
Acked-by: Simon Glass

bd_info: remove bi_barudrate member from struct bd_info

2014-05-12T19:19:45+00:00

gd->bd->bi_baudrate is a copy of gd->baudrate.

Since baudrate is a common feature for all architectures,
keep gd->baudrate only.

It is true that bi_baudrate was passed to the kernel in that structure
but it was a long time ago.

Signed-off-by: Masahiro Yamada 
Cc: Tom Rini 
Cc: Simon Glass 
Cc: Wolfgang Denk 
Cc: Heiko Schocher 
Acked-by: Michal Simek  (For microblaze)

MIPS: drop incaip board

2014-04-20T11:16:43+00:00

This is dead hardware and no one is interested in making the
necessary changes for upcoming features like generic board or
driver model.

Signed-off-by: Daniel Schwierzeck 
Cc: Wolfgang Denk

MIPS: allow use of generic board

2014-04-20T11:16:43+00:00

This patch allows MIPS boards to make use of generic board, replacing
arch/mips/lib/board.c with common/board_{f,r}.c and struct bd_info with
the asm-generic version.

Signed-off-by: Paul Burton

MIPS: fix types u64 and __u64 to unsigned long long

2014-03-04T22:18:00+00:00

Linux MIPS uses asm-generic/int-ll64.h in asm/types.h.
Thus u64 and __u64 are defined as unsigned long long. Port this
over to U-Boot.

Signed-off-by: Daniel Schwierzeck

malta: enable PIIX4 SERIRQ

2013-11-26T20:49:34+00:00

Whilst U-boot does not require this itself, Linux currently relies upon
it having been muxed and enabled by the bootloader. Thus in order to
preserve compatibility with current kernels before a fix is merged in
Linux we will enable the SERIRQ interrupt and mux it to its pin.

Without doing this current kernels will never receive serial port
interrupts and the end result is typically that userland appears to
hang.

Signed-off-by: Paul Burton

malta: use unmapped flash base address

2013-11-15T10:16:59+00:00

The physical base address of the NOR flash is 0x1e000000
on the Malta boards. The hardware also maps the first 4MiB
of the flash into the 0x1fc00000-0x1fffffff range.

Currently, U-Boot uses the mapped address to access the
flash, which does not work in recent qemu versions.

Since commit a427338b222b43197c2776cbc996936df0302f51
(mips_malta: correct reading MIPS revision at 0x1fc00010)
writing to the mapped address space causes a CPU exception.
Due to the exception, U-Boot hangs during boot when it tries
to detect the CFI flash chip.

Use the correct physical address for the MALTA_FLASH_BASE
constant to fix the problem. In order to avoid relocation
problems, also update the CONFIG_SYS_{TEXT,MONITOR}_BASE
constants.

The change makes it possible to start U-Boot on a Malta
board emulated with Qemu 1.6.1 and 1.7.0-rc0. It also
works on older versions (tested with 1.1.1, 1.2.2, 1.4.2,
1.5.3).

Signed-off-by: Gabor Juhos 
Signed-off-by: Daniel Schwierzeck 
Cc: Paul Burton

malta: arch/mips/include/asm/malta.h SPDX license tag

2013-11-11T11:32:58+00:00

This patch replaces the GPL-2.0 text with a GPL-2.0
SPDX-License-Identifier tag, and adds Imagination Technologies copyright
following my recent changes.

Signed-off-by: Paul Burton

malta: setup PIIX4 interrupt route

2013-11-09T16:21:02+00:00

Without setting up the PIRQ[A:D] interrupt routes, PCI interrupts will
be left disabled. Linux does not set up this routing but relies upon it
having been set up by the bootloader, reading back the IRQ lines which
the PIRQ[A:D] signals have been routed to.

This patch routes PIRQA & PIRQB to IRQ 10, and PIRQC & PIRQD to IRQ 11.
This matches the setup used by YAMON.

Signed-off-by: Paul Burton