u-boot.git/arch/mips/lib/Makefile, branch v2017.07

MIPS: add handling for generic and EJTAG exceptions

2016-11-30T15:12:17+00:00

Add exception handlers for generic and EJTAG exceptions. Most of
the assembly code is imported from Linux kernel and adapted to U-Boot.
The exception vector table will be reserved above the stack before
U-Boot is relocated. The exception handlers will be installed and
activated after relocation in the initr_traps hook function.

Generic exceptions are handled by showing a CPU register dump similar
to Linux kernel. For example:

malta # md 1
00000001:
Ooops:
$ 0   : 00000000 00000000 00000009 00000004
$ 4   : 8ff7e108 00000000 0000003a 00000000
$ 8   : 00000008 00000001 8ff7cd18 00000004
$12   : 00000002 00000000 00000005 0000003a
$16   : 00000004 00000040 00000001 00000001
$20   : 00000000 8fff53c0 00000008 00000004
$24   : ffffffff 8ffdea44
$28   : 90001650 8ff7cd00 00000004 8ffe6818
Hi    : 00000000
Lo    : 00000004
epc   : 8ffe6848 (text bfc28848)
ra    : 8ffe6818 (text bfc28818)
Status: 00000006
Cause : 00000410 (ExcCode 04)
BadVA : 8ff9e928
PrId  : 00019300
 ### ERROR ### Please RESET the board ###

EJTAG exceptions are checked for SDBBP and delegated to the SDBBP handler
if necessary. Otherwise the debug mode will simply be exited. The SDBBP
handler currently prints the contents of registers c0_depc and c0_debug.
This could be extended in the future to handle semi-hosting according to
the MIPS UHI specification.

Signed-off-by: Daniel Schwierzeck 
Reviewed-by: Paul Burton 
Tested-by: Paul Burton

MIPS: reserve space for exception vectors

2016-11-30T15:11:46+00:00

In order to set own exception handlers, a table with the exception
vectors must be built in DRAM and the CPU EBase register must be
set to the base address of this table.

Reserve the space above the stack and use gd->irq_sp as storage
for the exception base address.

Signed-off-by: Daniel Schwierzeck

MIPS: Support dynamic I/O port base address

2016-02-01T21:13:25+00:00

The existing mips_io_port_base variable isn't suitable for use early
during boot since it will be stored in the .data section which may not
be writable pre-relocation. Fix this by moving the I/O port base address
into struct arch_global_data. In order to avoid adding this field for
all targets, make this dependant upon a new Kconfig entry
CONFIG_DYNAMIC_IO_PORT_BASE. Malta is the only board which sets a
non-zero I/O port base, so select this option only for Malta.

Signed-off-by: Paul Burton

MIPS: unify cache initialization code

2015-01-29T11:55:01+00:00

The mips32 & mips64 cache initialization code differs only in that the
mips32 code supports reading the cache size from coprocessor 0 registers
at runtime. Move the more developed mips32 version to a common
arch/mips/lib/cache_init.S & remove the now-redundant mips64 version in
order to reduce duplication. The temporary registers used are shuffled
slightly in order to work for both mips32 & mips64 builds. The RA
register is defined differently to suit mips32 & mips64, but will be
removed by a later commit in the series after further cleanup.

Signed-off-by: Paul Burton 
Cc: Daniel Schwierzeck

MIPS: unify cache maintenance functions

2015-01-29T11:55:00+00:00

Move the more developed mips32 version of the cache maintenance
functions to a common arch/mips/lib/cache.c, in order to reduce
duplication between mips32 & mips64.

Signed-off-by: Paul Burton 
Cc: Daniel Schwierzeck

MIPS: remove board.c

2014-11-27T15:20:37+00:00

After all MIPS boards are switched to generic-board, the
MIPS specific board.c can be removed.

Signed-off-by: Daniel Schwierzeck

MIPS: allow use of generic board

2014-04-20T11:16:43+00:00

This patch allows MIPS boards to make use of generic board, replacing
arch/mips/lib/board.c with common/board_{f,r}.c and struct bd_info with
the asm-generic version.

Signed-off-by: Paul Burton

MIPS: move mips_io_port_base out of board.c

2014-04-20T11:16:42+00:00

Move the definition of this variable out of arch/mips/lib/board.c in
preparation for allowing use of generic board on MIPS, which will lead
to this file not being compiled.

Signed-off-by: Paul Burton

kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC

2014-03-07T15:59:06+00:00

Before this commit, USE_PRIVATE_LIBGCC was defined in
arch-specific config.mk and referenced in
arch/$(ARCH)/lib/Makefile.

We are not happy about parsing config.mk again and again.
We have to keep the same behavior with a different way.

By adding "CONFIG_" prefix, this macro appears
in include/autoconf.mk, include/spl-autoconf.mk.
(And treating USE_PRIVATE_LIBGCC as CONFIG macro
is reasonable enough.)

Tegra SoC family defined USE_PRIVATE_LIBGCC as "yes"
in arch/arm/cpu/arm720t/tegra*/config.mk,
whereas did not define it in arch/arm/cpu/armv7/tegra*/config.mk.

It means Tegra enables PRIVATE_LIBGCC only for SPL.
We can describe the same behavior by adding

  #ifdef CONFIG_SPL_BUILD
  # define CONFIG_USE_PRIVATE_LIBGCC
  #endif

to include/configs/tegra-common.h.

Signed-off-by: Masahiro Yamada 
Cc: Tom Warren 
Cc: Simon Glass 
Acked-by: Stephen Warren

mips: convert makefiles to Kbuild style

2013-10-31T17:26:45+00:00

Signed-off-by: Masahiro Yamada 
Cc: Daniel Schwierzeck