u-boot.git/arch/mips, branch v2024.07

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

mmc: Migrate MMC_SUPPORTS_TUNING to Kconfig

2024-05-07T14:00:40Z

The constraints on the MMC_SUPPORTS_TUNING symbol can easily be expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING). Furthermore, in order to remove from the MMC subsystem, the way this symbol is used today needs to be changed in order to continue functioning. Reviewed-by: Jaehoon Chung Signed-off-by: Tom Rini

global: Make include

2024-05-06T21:07:48Z

This follows the example of RISC-V where includes directly as "gd" includes a reference to bd_info already and so the first must include the second anyhow. We then remove from all of the places which include references to "gd" an so have already. Signed-off-by: Tom Rini

Merge patch series "Kconfig: some cleanups"

2024-04-22T17:01:56Z

Michal Simek says: I looked as cleaning up some dependencies and I found that qconfig is reporting some issues. This series is fixing some of them. But there are still some other pending. That's why please go and fix them if they are related to your board. UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in a loop you will find some other issue with copyright chars or some issues in files taken from the Linux kernel like DTs. They should be likely fixed in the kernel first. Based on discussion I am ignoring names too.

common: Convert *.c/h from UTF-8 to ASCII enconfing

2024-04-22T17:01:48Z

Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or names are converted. Signed-off-by: Michal Simek Reviewed-by: Tom Rini Acked-by: Marek Behún

Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled""

2024-04-18T14:29:35Z

As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini

Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"

2024-04-10T23:06:27Z

Simon Glass says: This series is the culmanation of the current line of refactoring series. It adjusts pxe to call the booting functionality directly rather than going through the command-line interface. With this is is possible to boot using the extlinux bootmeth without the command line enabled. It also updates fastboot to do a similar thing.

treewide: Make arch-specific bootm code depend on BOOTM

2024-04-10T23:04:25Z

Allow these functions to be compiled in when CONFIG_BOOTM is enabled, even if CONFIG_CMD_BOOTM is not. Signed-off-by: Simon Glass Acked-by: Angelo Dureghello

Merge tag 'u-boot-socfpga-next-20240319' of https://source.denx.de/u-boot/custodians/u-boot-socfpga into next

2024-03-19T13:10:30Z

- A new driver in the misc to register setting from device tree. This also provides user a clean interface and all register settings are centralized in one place, device tree. - Enable Agilex5 platform for Intel product. Changes, modification and new files are created for board, dts, configs and makefile to create the base for Agilex5. Build-tested on SoC64 boards, boot tested on some of them.

mips: fix change_k0_cca()

2024-03-13T20:15:40Z

The intention of change_k0_cca() is to read the C0.Config register into register $t0, update $t0 with the new cache coherency mode passed in $a0 and write back $t0 to C0.Config. With MIPS32 R2 or later instruction sets, this can be achieved with a single instruction with INS. The source and destination register of the INS instruction is passed as first parameter. In case of change_k0_cca() it is register $t0. But for writing back the updated value to C0.Config, the incorrect $a0 register is used. This is only correct in the MIPS32 R1 code path. Fix the `mtc0` instruction to write back the value of the $t0 register. Fix the MIPS32 R1 code path to also store the updated value in $t0. Reported by user ddqxy138 on Github. https://github.com/u-boot/u-boot/commit/b838586086af3278bcaead3720c7a18813cf4619 Signed-off-by: Daniel Schwierzeck