u-boot.git/arch/powerpc/cpu/mpc512x, branch v2011.09

video: Add SHARP LQ084S3LG01 LCD support on P1022DS

2011-08-04T20:55:33Z

The SHARP LQ084S3LG01 is a TFT LCD used on the P1022DS (revision "C") board. This device only supports 800x600 resolution, so if that resolution is selected, assume that this is the device. The device is attached to the LVDS port on the P1022DS board. The existing 800x600 entry (for the PDM360NG board) is actually 800x480, so we fix that. To support two different 800x resolutions, the Y-resolution is now passed to fsl_diu_init() and both values are used to pick the proper fb_videomode structure. The data for the 800x600 video mode is originally from Jiang Yutang. Signed-off-by: Timur Tabi Signed-off-by: Jiang Yutang

unify version_string

2011-07-28T15:22:53Z

This patch removes the architecture specific implementation of version_string where possible. Some architectures use a special place and therefore we provide U_BOOT_VERSION_STRING definition and a common weak symbol version_string. Signed-off-by: Andreas Bie�mann CC: Mike Frysinger CC: Peter Pan Acked-by: Mike Frysinger

serial: drop useless ctlr field

2011-07-26T14:38:05Z

The multi serial support has a "ctlr" field which almost no one uses, but everyone is forced to set to useless strings. So punt it. Funny enough, the only code that actually reads this field (the mpc8xx driver) has a typo where it meant to look for the SCC driver. Fix it while converting the check to use the name field. Signed-off-by: Mike Frysinger CC: Heiko Schocher CC: Anatolij Gustschin CC: Tom Rix CC: Minkyu Kang CC: Craig Nauman CC: Marek Vasut CC: Prafulla Wadaskar CC: Mahavir Jain

serial: push default_serial_console to drivers

2011-07-26T14:37:57Z

Rather than sticking arch/board/driver specific logic in the common serial code, push it all out to the respective drivers. The serial drivers declare these funcs weak so that boards can still override things with their own definition. Signed-off-by: Mike Frysinger CC: Heiko Schocher CC: Anatolij Gustschin CC: Tom Rix CC: Minkyu Kang CC: Craig Nauman CC: Prafulla Wadaskar CC: Mahavir Jain Tested-by: Minkyu Kang

powerpc: use 'video-mode' environment variable to configure DIU

2011-04-28T19:31:16Z

Use the 'video-mode' environment variable (for Freescale chips that have a DIU display controller) to designate the full video configuration. Previously, the DIU driver used the 'monitor' variable, and it was used only to determine the output video port. The old definition of the "monitor" environment variable only determines which video port to use for output. This variable was set to a number (0, 1, or sometimes 2) to specify a DVI, LVDS, or Dual-LVDS port. The resolution was hard-coded into board-specific code. The Linux command-line arguments needed to be hard-coded to the proper video definition string. Signed-off-by: Timur Tabi Signed-off-by: Anatolij Gustschin

Revert "PowerPC: Add support for -msingle-pic-base"

2011-04-20T20:11:21Z

This reverts commit 39768f7715ed637ef02f49fc7de664cc1aaf14b3. Reson: it breaks a number of boards with embedded environment as the code size grows in some places.

PowerPC: Add support for -msingle-pic-base

2011-04-11T19:38:47Z

-msingle-pic-base is a new gcc option for ppc and it reduces the size of my u-boot with 6-8 KB. While at it, add -fno-jump-tables too to save a few more bytes. -msingle-pic-base will be in gcc 4.6, however backported patches are available at http://bugs.gentoo.org/show_bug.cgi?id=347281 Signed-off-by: Joakim Tjernlund

PowerPC: Move -fPIC flag to common place

2011-04-11T19:36:41Z

The -fPIC flag belongs with -mrelocatable, move it there. Also change -fPIC to -fpic as this produces smaller binaries. However, currently -mrelocatable promotes -fpic to -fPIC, a fix for this is in upcoming gcc 4.6 or you can apply this small patch to gcc: diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h index 8da8410..e4b8280 100644 --- a/gcc/config/rs6000/sysv4.h +++ b/gcc/config/rs6000/sysv4.h @@ -227,7 +227,8 @@ do { \ } \ \ else if (TARGET_RELOCATABLE) \ - flag_pic = 2; \ + if (!flag_pic) \ + flag_pic = 2; \ } while (0) #ifndef RS6000_BI_ARCH -- Signed-off-by: Joakim Tjernlund

rename _end to __bss_end__

2011-03-27T17:18:37Z

Currently, _end is used for end of BSS section. We want _end to mean end of u-boot image, so we rename _end to __bss_end__ first. Signed-off-by: Po-Yu Chuang

PowerPC: Add relocation support for -fpic

2010-12-17T19:25:10Z

By rearranging the linker script we get support for relocation of -fpic for free. Signed-off-by: Joakim Tjernlund Acked-by: Scott Wood Acked-by: Kim Phillips