u-boot.git/arch/powerpc/cpu, branch v2014.04

kbuild: rename OBJTREE to objtree

2014-03-12T21:04:58Z

Prior to Kbuild, $(OBJTREE) was used for pointing to the top of build directory with absolute path. In Kbuild style, $(objtree) is used instead. This commit renames OBJTREE to objtree and delete the defition of OBJTREE. Signed-off-by: Masahiro Yamada

kbuild: rename TOPDIR to stctree

2014-03-12T21:04:55Z

Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada

usb: create common header virtual root hub descriptors

2014-03-10T17:53:36Z

Many USB host controller drivers contain almost identical copies of the same virtual root hub descriptors. Put these into a common file to avoid duplication. Note that there were some very minor differences between the descriptors in the various files, such as: - USB 1.0 vs. USB 1.1 - Manufacturer/Device ID - Max packet size - String content I assume these aren't relevant. Cc: Thomas Lange Cc: Shinya Kuribayashi Cc: Gary Jennejohn Cc: Wolfgang Denk Cc: Eric Millbrandt Cc: Pierre Aubert Cc: Stefan Roese Cc: Daniel Hellstrom Cc: Denis Peter Cc: Rodolfo Giometti Cc: Zhang Wei Cc: Mateusz Zalega Cc: Remy Bohmer Cc: Markus Klotzbuecher Cc: Minkyu Kang Cc: Gary Jennejohn Cc: C Nauman Cc: David Müller Cc: Yoshihiro Shimoda Cc: Nobuhiro Iwamatsu Cc: Thomas Abraham Cc: Tom Rini Cc: Andrew Murray Cc: Matej Frančeškin Cc: Cliff Cai Cc: Bryan Wu Signed-off-by: Stephen Warren

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

2014-03-08T01:54:22Z

powerpc/usb: Workaround for erratum-A006261

2014-03-07T22:52:16Z

USB spec says that the minimum disconnect threshold should be over 525 mV. However, internal USB PHY threshold value is below this specified value. Due to this some devices disconnect at run-time. Hence, phy settings are tweaked to increased disconnect threshold to be above 525mV by using this workaround. Signed-off-by: Suresh Gupta Reviewed-by: York Sun

powerpc/b4860: Add workaround for errata A006384 and A006475

2014-03-07T22:52:01Z

SerDes PLLs may not lock reliably at 5 G VCO configuration(A006384) and at cold temperatures(A006475), workaround recalibrate the PLLs with some SerDes configuration Both these errata are only applicable for b4 rev1. So, make workaround for these errata conditional, depending upon soc version. Signed-off-by: Shaveta Leekha Reviewed-by: York Sun

85xx/b4860: Alternate serdes protocols for B4860/B4420

2014-03-07T22:50:00Z

On B4860 and B4420, some serdes protocols can be used with LC VCO as well as Ring VCO options. Addded Alternate options with LC VCO for such protocols. For example protocol 0x2a on srds 1 becomes 0x29 if it is LC VCO. The alternate option has the same functionality as the original option; the only difference being LC VCO rather than Ring VCO. Signed-off-by: Poonam Aggrwal Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

board/b4860qds: Add support to make Aurora work on B4860QDS

2014-03-07T22:49:16Z

1) Add new SerDes1 protocols having Aurora in them 2) Add VSC cross point connections for Aurora to work with CPRI and SGMIIs 3) Configure VSC crossbar switch to connect SerDes1 lanes to aurora on board, by checking SerDes1 protocols 4) SerDes1 Refclks have been set properly to make Aurora, CPRI and SGMIIs to work together properly Signed-off-by: Shaveta Leekha Reviewed-by: York Sun

powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260

2014-03-07T15:59:06Z

Before this commit, CONFIG_MPC8260 and CONFIG_8260 were used mixed-up. All boards with mpc8260 cpu defined both of them: - CONFIG_MPC8260 was defined in board config headers and include/common.h - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk We do not need to have both of them. This commit keeps only CONFIG_MPC8260. This commit does: - Delete CONFIG_8260 and CONFIG_MPC8260 definition in config headers and include/common.h - Rename CONFIG_8260 to CONFIG_MPC8260 in arch/powerpc/cpu/mpc8260/config.mk. - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260 Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk

ppc4xx: Remove 4xx NAND booting support

2014-03-07T15:59:06Z

As ppc4xx currently only supports the deprecated nand_spl infrastructure and nobody seems to have time / resources to port this over to the newer SPL infrastructure, lets remove NAND booting completely. This should not affect the "normal", non NAND-booting ppc4xx platforms that are currently supported. Signed-off-by: Stefan Roese Cc: Wolfgang Denk Cc: Tirumala Marri Cc: Matthias Fuchs Cc: Masahiro Yamada Cc: Tom Rini Tested-by: Matthias Fuchs