u-boot.git/arch/powerpc/include/asm/fsl_fman.h, branch next

net: Move some header files to include/

2015-10-29T17:34:00Z

The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie Signed-off-by: Gong Qianyu Reviewed-by: York Sun

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

fm/mEMAC: add mEMAC frame work

2012-10-22T19:31:25Z

The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh Signed-off-by: Poonam Aggrwal Signed-off-by: Roy Zang Signed-off-by: Andy Fleming

powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY

2011-10-09T22:57:53Z

Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala

powerpc/85xx: Add support for FMan ethernet in Independent mode

2011-09-30T00:01:05Z

The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu Signed-off-by: Andy Fleming Signed-off-by: Timur Tabi Signed-off-by: Roy Zang Signed-off-by: Dai Haruki Signed-off-by: Kim Phillips Signed-off-by: Ioana Radulescu Signed-off-by: Lei Xu Signed-off-by: Mingkai Hu Signed-off-by: Scott Wood Signed-off-by: Shaohui Xie Signed-off-by: Kumar Gala

powerpc/fsl_fman: Add initial fman immap structures

2010-07-26T13:07:47Z

Add basic structures for Frame Manager on P4080/P3041/P5020 devices Signed-off-by: Kumar Gala