u-boot.git/arch/powerpc/include/asm, branch v2013.01

Add strcasecmp() and strncasecmp()

2012-12-11T20:17:34Z

strncasecmp() is present as strnicmp() but disabled. Make it available and define strcasecmp() also. There is a only a small performance penalty to having strcasecmp() call strncasecmp(), so do this instead of a standalone function, to save code space. Update the prototype in arch-specific headers as needed to avoid warnings. Signed-off-by: Simon Glass

mpc5200: Add SPL support

2012-12-05T16:30:51Z

This patch adds SPL booting support (NOR flash) for the MPC5200 platforms. Signed-off-by: Stefan Roese

powerpc: Extract EPAPR_MAGIC constants into processor.h

2012-12-05T16:27:02Z

By extracting these defines into a header, they can be re-used by other C sources as well. This will be done by the SPL framework OS boot support. Signed-off-by: Stefan Roese

powerpc/85xx: update the work-around for P4080 erratum SERDES-9

2012-11-28T00:28:07Z

The documented work-around for P4080 erratum SERDES-9 has been updated. It is now compatible with the work-around for erratum A-4580. This requires adding a few bitfield macros for the BnTTLCRy0 register. Signed-off-by: Timur Tabi Signed-off-by: Andy Fleming

powerpc/p4080ds: fix PCI-e x8 link training down failure

2012-11-28T00:28:07Z

Due to SerDes configuration error, if we set the PCI-e controller link width as x8 in RCW and add a narrower width(such as x4, x2 or x1) PCI-e device to PCI-e slot, it fails to train down to the PCI-e device's link width. According to p4080ds errata PCIe-A003, we reset the PCI-e controller link width to x4 in u-boot. Then it can train down to x2 or x1 width to make the PCI-e link between RC and EP. Signed-off-by: Yuanquan Chen Signed-off-by: Andy Fleming

powerpc/corenet_ds: move SATA config to board configuration

2012-11-28T00:28:07Z

board configuration file is included before asm/config_mpc85xx.h. however, CONFIG_FSL_SATA_V2 is defined in asm/config_mpc85xx.h. it will never take effective in the board configuration file for this kind of code : #ifdef CONFIG_FSL_SATA_V2 ... #endif To solve this problem, move CONFIG_FSL_SATA_V2 to board configuration header file. This patch reverts Timur's commit:3e0529f742e893653848494ffb9f7cd0d91304bf Signed-off-by: Roy Zang Signed-off-by: Andy Fleming

powerpc/85xx: implement check for erratum A-004580 work-around

2012-11-28T00:28:07Z

The work-around for erratum A-004580 ("Internal tracking loop can falsely lock causing unrecoverable bit errors") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004580, we can do this by verifying that the values in the specific registers that the work-around says to update. This change requires access to the SerDes lane sub-structure in serdes_corenet_t, so we make it a named struct. Signed-off-by: Timur Tabi Signed-off-by: Andy Fleming

powerpc/mpc85xx: Temporary fix for spin table backward compatibility

2012-11-28T00:28:06Z

Once u-boot sets the spin table to cache-enabled memory, old kernel which uses cache-inhibit mapping without coherence will not work properly. We use this temporary fix until kernel has updated its spin table code. For now this fix is activated by default. To disable this fix for new kernel, set environmental variable "spin_table_compat=no". After kernel has updated spin table code, this default shall be changed. Signed-off-by: York Sun Signed-off-by: Andy Fleming

powerpc/85xx: implement check for erratum A-004849 work-around

2012-11-28T00:28:06Z

The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a deadlock under certain traffic patterns causing the system to hang") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004849, we can do this by verifying that the values in the specific registers that the work-around says to update. Signed-off-by: Timur Tabi Signed-off-by: Andy Fleming

powerpc/85xx/p5040: add CONFIG_SYS_PPC64, del CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC

2012-11-28T00:28:05Z

The P5040 has an e5500 core, so CONFIG_SYS_PPC64 should be defined in config_mpc85xx.h. This macro was absent in the initial P5040 patch because it crossed paths with the patch that introduced the macro. Also delete CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC, since it's not used in the upstream U-Boot. It's a holdover from the SDK. Signed-off-by: Timur Tabi Signed-off-by: Andy Fleming