u-boot.git/arch/powerpc/include/asm, branch v2019.04

powerpc: enabled building with CONFIG_DM=y

2019-03-02T12:41:20Z

Moving to the driver model requires CONFIG_DM to be enabled. Currently several boards like kmeter1_defconfig produce a build error when CONFIG_DM is enabled: In file included from include/common.h:35, from ./arch/powerpc/include/asm/fsl_lbc.h:10, from include/mpc83xx.h:10, from ./arch/powerpc/include/asm/ppc.h:27, from ./arch/powerpc/include/asm/u-boot.h:18, from include/dm/of.h:10, from include/dm/ofnode.h:12, from include/dm/device.h:13, from include/linux/mtd/mtd.h:26, from drivers/mtd/mtdconcat.c:25: include/image.h: In function ‘image_check_target_arch’: include/image.h:846:3: error: #error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" ^~~~~ include/image.h:848:31: error: ‘IH_ARCH_DEFAULT’ undeclared (first use in this function); did you mean ‘IH_ARCH_COUNT’? return image_check_arch(hdr, IH_ARCH_DEFAULT); The error can be avoided by moving the definition of IH_ARCH_DEFAULT before #include Signed-off-by: Heinrich Schuchardt Reviewed-by: Prabhakar Kushwaha

Merge branch 'master' of git://git.denx.de/u-boot-spi

2018-12-05T20:06:24Z

- Various MTD fixes from Boris - Zap various unused / legacy paths. - pxa3xx NAND update from Miquel Signed-off-by: Tom Rini

spi: Zap CONFIG_HARD_SPI

2018-11-27T15:36:53Z

In legacy CONFIG_HARD_SPI initalizing spi_init code, which was removed during dm conversion cleanup. So remove the dead instances of CONFIG_HARD_SPI, and related code. Signed-off-by: Jagan Teki

spl: Add support for passing handoff info to U-Boot proper

2018-11-26T13:25:37Z

There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini Signed-off-by: Simon Glass

powerpc: t1040: Correct RCW EC2 settings

2018-10-29T20:19:43Z

Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2 settings. - The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should be 0x04000000 (value of 1 in RCW bit [420:421]) - Value of 2/3 are reserved in RCW bit [420:421], hence there is no macro FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII. Signed-off-by: Bin Meng Acked-by: Poonam Aggrwal Reviewed-by: York Sun

powerpc: t1040: Correct RCW MAC2_GMII_SEL value

2018-10-29T20:13:33Z

Per T1040RM (Rev. 1, 08/2015), the value of FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong and should be 0x00000080 (bit 440 in the RCW). Signed-off-by: Bin Meng Acked-by: Poonam Aggrwal Reviewed-by: York Sun

misc: Add MPC83xx serdes driver

2018-09-18T14:12:21Z

Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass Signed-off-by: Mario Six

cpu: Add MPC83xx CPU driver

2018-09-18T14:12:21Z

Add a CPU driver for the MPC83xx architecture. Signed-off-by: Mario Six

clk: Add MPC83xx clock driver

2018-09-18T06:01:18Z

Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six

powerpc: Add read_/write_ macros