u-boot.git/arch/powerpc/include, branch v2010.12

Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

2010-10-29T19:32:07Z

By now, the majority of architectures have working relocation support, so the few remaining architectures have become exceptions. To make this more obvious, we make working relocation now the default case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher Tested-by: Reinhard Meyer

Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

2010-10-26T19:05:30Z

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk Acked-by: Kumar Gala

Adding fixed sdram setting for cornet_ds board

2010-10-20T07:38:39Z

800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: York Sun Signed-off-by: Kumar Gala

powerpc/8xxx: Add fdt_fixup_phy_connection helper

2010-10-20T07:27:18Z

Add a common helper that will set the PHY connection type based on enum. We use this on eTSEC, UCC, and will with Fman in the future. Signed-off-by: Kumar Gala

powerpc/fsl: Introduce common enum for PHY types

2010-10-20T07:27:18Z

Have a common enum for phy types that we use in the UCC driver. We will also use this enum for dealing with phy connection fixup in the device tree. Signed-off-by: Kumar Gala

boot: change some arch ifdefs to feature ifdefs

2010-10-18T20:53:32Z

The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd are currently enabled by various combinations of CONFIG_M68K, CONFIG_POWERPC and CONFIG_SPARC. Use CONFIG_SYS_BOOT_ defines instead. CONFIG_SYS_BOOT_RAMDISK_HIGH CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Define these as appropriate in arch/include/asm/config.h files. Signed-off-by: John Rigby Acked-by: Wolfgang Denk

powerpc: Cleanup BOOTFLAG_* references

2010-10-18T20:38:56Z

Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: Peter Tyser

MPC5121: Add USB EHCI support

2010-10-18T20:33:32Z

Signed-off-by: Francesco Rendine Signed-off-by: Damien Dusha Signed-off-by: Anatolij Gustschin Coding style cleanup; slight file restructuring. Signed-off-by: Wolfgang Denk Acked-by: Remy Bohmer

powerpc/p4080: Add new CPC register - HDBCR0

2010-10-07T14:49:47Z

Manual was updated to add a new register for disabling CDQ speculation. Signed-off-by: Kumar Gala

ppc4xx: Remove some testing hacks from ppc4xx.h

2010-10-04T09:20:11Z

I accidentally left these hacks in the code while doing the big header cleanup. Let's remove it now. Signed-off-by: Stefan Roese