u-boot.git/arch/powerpc/include, branch v2018.11

powerpc: t1040: Correct RCW EC2 settings

2018-10-29T20:19:43Z

Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2 settings. - The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should be 0x04000000 (value of 1 in RCW bit [420:421]) - Value of 2/3 are reserved in RCW bit [420:421], hence there is no macro FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII. Signed-off-by: Bin Meng Acked-by: Poonam Aggrwal Reviewed-by: York Sun

powerpc: t1040: Correct RCW MAC2_GMII_SEL value

2018-10-29T20:13:33Z

Per T1040RM (Rev. 1, 08/2015), the value of FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong and should be 0x00000080 (bit 440 in the RCW). Signed-off-by: Bin Meng Acked-by: Poonam Aggrwal Reviewed-by: York Sun

misc: Add MPC83xx serdes driver

2018-09-18T14:12:21Z

Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass Signed-off-by: Mario Six

cpu: Add MPC83xx CPU driver

2018-09-18T14:12:21Z

Add a CPU driver for the MPC83xx architecture. Signed-off-by: Mario Six

clk: Add MPC83xx clock driver

2018-09-18T06:01:18Z

Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six

powerpc: Add read_/write_ macros

2018-09-18T06:01:18Z

Define the read*_*/write*_* macros for the PowerPC platform to be able to use the macros in wait_bit.h. Signed-off-by: Mario Six

arch: types.h: factor out fixed width typedefs to int-ll64.h

2018-09-11T00:48:16Z

All architectures have the same definition for s8/16/32/64 and u8/16/32/64. Factor out the duplicated code into . BTW, Linux unified the kernel space definition into int-ll64.h a few years ago as you see in Linux commit 0c79a8e29b5f ("asm/types.h: Remove include/asm-generic/int-l64.h"). Signed-off-by: Masahiro Yamada

configs: Remove empty #ifdef/#ifndef blocks from configs

2018-07-10T20:55:57Z

Remove empty #ifdef/#ifndef..#endif blocks where the configuration they guarded has been completely removed. Signed-off-by: Alex Kiernan

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

powerpc: mpc8xx: redistribute data in CPM dpram

2018-04-06T20:30:37Z

Some malloc memory is needed at startup for DM model. Lets reorganise the use of the CPM dpram. The MPC866/885 dpram, we have 8kbytes dual port RAM, which is usable as: IMMR + 0x2000..0x2800: BD/Data/Microcode IMMR + 0x2800..0x2e00: BD/Data IMMR + 0x2e00..0x3800: BD/Data/Microcode IMMR + 0x3800..0x3a00: BD/Data IMMR + 0x3a00..0x3c00: BD/Data/Microcode IMMR + 0x3c00..0x4000: Parameters for the Peripheral Controllers Lets reallocate all BDs in the 3800..3a00 area and give the full 2800..2e00 for dynamic RAM allocation including global data That way, the microcode areas remain available if needed one day. Signed-off-by: Christophe Leroy