u-boot.git/arch/powerpc/include, branch v2020.04

dma-mapping: add for all architectures

2020-02-20T07:09:54Z

To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada

common: Move upmconfig() to ppc.h

2020-01-17T18:27:28Z

This file is only used by PowerPC so move it to an arch-specific header file. Signed-off-by: Simon Glass

Add global variable sdhc_per_clk for arm/powerpc

2020-01-16T05:16:26Z

The QorIQ eSDHC controller supports two reference clocks. They are platform clock and periperhal clock. The global variable sdhc_clk has already been used for platform clock. This patch is to add another global variable sdhc_per_clk for periperhal clock, which provides higher frequency and is required to be used for SD UHS and eMMC HS200/HS400 speed modes. Signed-off-by: Yangbo Lu

powerpc/mpc85xx: drop eSDHC periperhal clock code

2020-01-16T05:16:25Z

The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu

mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309

2020-01-08T07:14:20Z

The MPC8309 has two gpio controllers (which is already correctly reflected in its struct immap definition). Signed-off-by: Rasmus Villemoes Reviewed-by: Mario Six

mpc83xx: immap_83xx: add spi8xxx_t in immap for mpc8309

2020-01-08T07:14:14Z

Allow drivers/spi/mpc8xxx_spi.c to be built for an mpc8309 target. Signed-off-by: Rasmus Villemoes Reviewed-by: Mario Six

mpc83xx: remove unused clock.h

2019-11-27T08:55:56Z

The clock.h was to define mxc_get_clock() providing clock value to fsl_esdhc driver. Since fsl_esdhc driver is using global data gd->arch.sdhc_clk directly now, we can remove this file. Signed-off-by: Yangbo Lu Reviewed-by: Priyanka Jain

freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name

2019-11-08T11:02:08Z

Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal Signed-off-by: Priyanka Jain

powerpc: mpc85xx: Move CONFIG_FSL_PCIE_DISABLE_ASPM to Kconfig

2019-06-20T05:13:55Z

Use the Kconfig option to select the PCIe ASPM errata. Signed-off-by: Hou Zhiqiang Reviewed-by: Prabhakar Kushwaha

powerpc: Simplify processor.h

2019-05-21T05:52:34Z

Lots of stuff in processor.h was taken verbatim from the Linux kernel. It was never synced, so most of it was removed or changed in the kernel since it was imported. Remove all the stuff that is unused in the current U-Boot sources; should anybody feel the need to re-sync with the kernel, they can do it later on. Signed-off-by: Mario Six