u-boot.git/arch/powerpc/lib/Makefile, branch v2016.03

common/board_f: factor out reserve_stacks

2015-02-17T21:52:42+00:00

Introduce arch_reserve_stacks() to tailor gd->start_addr_sp and gd->irq_sp to
the architecture needs.

Signed-off-by: Andreas Bießmann 
Reviewed-by: Simon Glass

kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC

2014-03-07T15:59:06+00:00

Before this commit, USE_PRIVATE_LIBGCC was defined in
arch-specific config.mk and referenced in
arch/$(ARCH)/lib/Makefile.

We are not happy about parsing config.mk again and again.
We have to keep the same behavior with a different way.

By adding "CONFIG_" prefix, this macro appears
in include/autoconf.mk, include/spl-autoconf.mk.
(And treating USE_PRIVATE_LIBGCC as CONFIG macro
is reasonable enough.)

Tegra SoC family defined USE_PRIVATE_LIBGCC as "yes"
in arch/arm/cpu/arm720t/tegra*/config.mk,
whereas did not define it in arch/arm/cpu/armv7/tegra*/config.mk.

It means Tegra enables PRIVATE_LIBGCC only for SPL.
We can describe the same behavior by adding

  #ifdef CONFIG_SPL_BUILD
  # define CONFIG_USE_PRIVATE_LIBGCC
  #endif

to include/configs/tegra-common.h.

Signed-off-by: Masahiro Yamada 
Cc: Tom Warren 
Cc: Simon Glass 
Acked-by: Stephen Warren

kbuild: use Linux Kernel build scripts

2014-02-19T16:07:50+00:00

Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

kbuild: change out-of-tree build

2014-02-19T16:07:50+00:00

This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C " syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj="
syntax for descending into sub-directories.
(We can write it like "make $(obj)=" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

powerpc: convert makefiles to Kbuild style

2013-10-31T17:26:44+00:00

Note:
arch/powerpc/cpu/mpc8260/Makefile is originally like follows:

    ------
    START   = start.o kgdb.o
    COBJS   = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
    ------
    COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
    ------
    $(LIB): $(OBJS)
            $(call cmd_link_o_target, $(OBJS) $(obj)kgdb.o)

The link rule `$(call cmd_link_o_target, $(OBJS) $(obj)kgdb.o)'
is weird.
kbdg.o is not included in $(OBJS) but linked into $(LIB)
and $(LIB) is not dependent on kgdb.o.
(Broken dependency tracking)

So,
    START   = start.o kgdb.o
shoud have been
    START   = start.o
    SOBJS   = kgdb.o

That is why this commit adds kgdb.o to obj-y, not to extra-y.

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk 
Cc: Stefan Roese

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM

2013-07-16T22:44:30+00:00

MAKEALL is fine for ppc4xx and mpc85xx.
Run checks were done on our controlcenterd hardware.

Signed-off-by: Dirk Eibach 
Signed-off-by: Andy Fleming

ppc: Enable generic board support

2013-03-15T20:14:00+00:00

This enables generic board support so that ppc boards can define
CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Simon Glass

powerpc/mpc83xx: add support for new SPL

2012-12-19T23:45:44+00:00

This adds arch support for PPC mpc83xx to boot "minimal" (4K) SPLs
using the new infrastructure.

Existing nand_spl targets are updated to deal with the name change
from nand_init.c to spl_minimal.c (as in theory this isn't limited
to NAND anymore).

Signed-off-by: Scott Wood 
Signed-off-by: Kim Phillips

mpc5200: Add SPL support

2012-12-05T16:30:51+00:00

This patch adds SPL booting support (NOR flash) for the
MPC5200 platforms.

Signed-off-by: Stefan Roese