u-boot.git/arch/riscv/lib/Makefile, branch v2020.01

riscv: add SPL support

2019-08-26T08:07:42Z

U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer Reviewed-by: Bin Meng Tested-by: Bin Meng Reviewed-by: Anup Patel

riscv: add run mode configuration for SPL

2019-08-26T08:07:42Z

U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer Reviewed-by: Bin Meng Tested-by: Bin Meng Reviewed-by: Anup Patel

RISCV: image: Add booti support

2019-05-09T08:47:52Z

This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra Reviewed-by: Tom Rini Tested-by: Karsten Merker Reviewed-by: Marek Vasut

riscv: Add a SYSCON driver for Andestech's PLMT

2019-04-08T01:45:08Z

The platform-Level Machine Timer (PLMT) block holds memory-mapped mtime register associated with timer tick. This driver implements the riscv_get_time() which is required by the generic RISC-V timer driver. Signed-off-by: Rick Chen Cc: Greentime Hu Reviewed-by: Bin Meng Reviewed-by: Lukas Auer

riscv: Add a SYSCON driver for Andestech's PLIC

2019-04-08T01:45:08Z

The Platform-Level Interrupt Controller (PLIC) block holds memory-mapped claim and pending registers associated with software interrupt. It is required for handling IPI. Signed-off-by: Rick Chen Cc: Greentime Hu Reviewed-by: Bin Meng Reviewed-by: Lukas Auer

riscv: implement IPI platform functions using SBI

2019-04-08T01:44:26Z

The supervisor binary interface (SBI) provides the necessary functions to implement the platform IPI functions riscv_send_ipi() and riscv_clear_ipi(). Use it to implement them. This adds support for inter-processor interrupts (IPIs) on RISC-V CPUs running in supervisor mode. Support for machine mode is already available for CPUs that include the SiFive CLINT. Signed-off-by: Lukas Auer Reviewed-by: Anup Patel Reviewed-by: Bin Meng Reviewed-by: Atish Patra Tested-by: Bin Meng

riscv: add infrastructure for calling functions on other harts

2019-04-08T01:44:25Z

Harts on RISC-V boot independently, U-Boot is responsible for managing them. Functions are called on other harts with smp_call_function(), which sends inter-processor interrupts (IPIs) to all other available harts. Available harts are those marked as available in the device tree and present in the available_harts mask stored in global data. The available_harts mask is used to register all harts that have entered U-Boot. Functions are specified with their address and two function arguments (argument 2 and 3). The first function argument is always the hart ID of the hart calling the function. On the other harts, the IPI interrupt handler handle_ipi() must be called on software interrupts to handle the request and call the specified function. Functions are stored in the ipi_data data structure. Every hart has its own data structure in global data. While this is not required at the moment (all harts are expected to boot Linux), this does allow future expansion, where other harts may be used for monitoring or other tasks. Signed-off-by: Lukas Auer Reviewed-by: Anup Patel Reviewed-by: Bin Meng Tested-by: Bin Meng

riscv: Implement riscv_get_time() API using rdtime instruction

2018-12-18T01:56:27Z

This adds an implementation of riscv_get_time() API that is using rdtime instruction. This is the case for S-mode U-Boot, and is useful for processors that support rdtime in M-mode too. Signed-off-by: Anup Patel Signed-off-by: Bin Meng Reviewed-by: Lukas Auer

riscv: Add a SYSCON driver for SiFive's Core Local Interruptor

2018-12-18T01:56:26Z

This adds U-Boot syscon driver for SiFive's Core Local Interruptor (CLINT). The CLINT block holds memory-mapped control and status registers associated with software and timer interrupts. This driver implements the riscv_get_time() API as required by the generic RISC-V timer driver, as well as some other APIs that are needed for handling IPI. Signed-off-by: Bin Meng Reviewed-by: Lukas Auer Reviewed-by: Anup Patel

riscv: Move do_reset() to a common place

2018-10-03T09:48:43Z

We don't have a reset method on any RISC-V board yet. Instead of adding the same 'unsupported' message for each CPU variant it might make more sense to add a generic do_reset function for all CPU variants to lib/, similar to the one for ARM (arch/arm/lib/reset.c). Suggested-by: Lukas Auer Signed-off-by: Bin Meng Reviewed-by: Lukas Auer