u-boot.git/arch/x86, branch v2014.04

kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/lib

2014-03-28T19:06:29Z

U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada Cc: Yuantian Tang

x86: specify CONFIG_USE_PRIVATE_LIBGCC more simply

2014-03-12T21:04:45Z

Signed-off-by: Masahiro Yamada Cc: Simon Glass

kbuild, x86: use a short log for arch/x86/lib/libgcc.a

2014-03-12T21:04:42Z

Signed-off-by: Masahiro Yamada Cc: Simon Glass

kbuild: add CONFIG_ prefix to USE_PRIVATE_LIBGCC

2014-03-07T15:59:06Z

Before this commit, USE_PRIVATE_LIBGCC was defined in arch-specific config.mk and referenced in arch/$(ARCH)/lib/Makefile. We are not happy about parsing config.mk again and again. We have to keep the same behavior with a different way. By adding "CONFIG_" prefix, this macro appears in include/autoconf.mk, include/spl-autoconf.mk. (And treating USE_PRIVATE_LIBGCC as CONFIG macro is reasonable enough.) Tegra SoC family defined USE_PRIVATE_LIBGCC as "yes" in arch/arm/cpu/arm720t/tegra*/config.mk, whereas did not define it in arch/arm/cpu/armv7/tegra*/config.mk. It means Tegra enables PRIVATE_LIBGCC only for SPL. We can describe the same behavior by adding #ifdef CONFIG_SPL_BUILD # define CONFIG_USE_PRIVATE_LIBGCC #endif to include/configs/tegra-common.h. Signed-off-by: Masahiro Yamada Cc: Tom Warren Cc: Simon Glass Acked-by: Stephen Warren

x86: Delete redundant compiler flags

2014-03-04T14:27:40Z

-Wstrict-prototypes, -ffreestanding, -fno-stack-protector are defined at the top Makefile for all architectures. Do not define them twice for x86. Signed-off-by: Masahiro Yamada Cc: Simon Glass Acked-by: Simon Glass

dts: generate multiple device tree blobs

2014-02-19T16:10:05Z

It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada

dts: move device tree sources to arch/$(ARCH)/dts/

2014-02-19T16:10:05Z

Unlike Linux Kernel, U-Boot historically had *.dts files under board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/. I think arch/$(ARCH)/dts dicretory is a better location to store both *.dts and *.dtsi files. For example, before this commit, board/xilinx/dts directory had both Microblaze dts (microblaze-generic.dts) and ARM dts (zynq-*.dts), which are totally unrelated. This commit moves *.dts to arch/$(ARCH)/dts/ directories, allowing us to describe nicely mutiple DTBs generation in the next commit. Signed-off-by: Masahiro Yamada

dts: re-write dts/Makefile more simply with Kbuild

2014-02-19T16:10:05Z

Useful rules in scripts/Makefile.lib allows us to easily generate a device tree blob and wrap it in assembly code. We do not need to parse a linker script to get output format and arch. This commit deletes ./u-boot.dtb since it is a copy of dts/dt.dtb. Signed-off-by: Masahiro Yamada

kbuild: change out-of-tree build

2014-02-19T16:07:50Z

This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C " syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=" syntax for descending into sub-directories. (We can write it like "make $(obj)=" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada Tested-by: Gerhard Sittig

x86: delete unused header files

2014-01-24T21:59:07Z

Signed-off-by: Masahiro Yamada Acked-by: Simon Glass