u-boot.git/arch/x86, branch v2017.05

fs: Kconfig: Add a separate config for FS_CBFS

2017-04-30T17:40:57Z

Rather than using CMD_CBFS for both the filesystem and its command, we should have a separate option for each. This allows us to enable CBFS support without the command, if desired, which reduces U-Boot's size slightly. Signed-off-by: Simon Glass [trini: imply FS_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini

fs: Convert CONFIG_CMD_CBFS to Kconfig

2017-04-30T17:40:56Z

This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: Simon Glass [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini

x86: Display the SPL banner only once

2017-04-18T07:51:21Z

At present on a cold reboot we must reset the CPU to get it to full speed. With 64-bit U-Boot this happens in SPL. At present we print the banner before doing this, the end result being that we print the banner twice. Print the banner a little later (after the CPU is ready) to avoid this. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Tested-by: Bin Meng

x86: Drop leading spaces in cpu_x86_get_desc()

2017-04-18T07:51:21Z

The Intel CPU name can have leading spaces. Remove them since they are not useful. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

x86: Introduce minimal PMU driver for Intel MID platforms

2017-04-10T02:02:03Z

This simple PMU driver allows to tyrn power on and off for selected devices. In particularly Intel Tangier needs to power on SDHCI controllers in order to access to them during board initialization. In the future it might be expanded to cover other Intel MID platforms, that's why it's located under arch/x86/lib and called pmu.c. Signed-off-by: Felipe Balbi Signed-off-by: Andy Shevchenko Reviewed-by: Simon Glass

x86: Add SCU IPC driver for Intel MID platforms

2017-04-10T02:02:03Z

Intel MID platforms have few microcontrollers inside SoC, one of them is so called System Controller Unit (SCU). Here is the driver to communicate with microcontroller. Signed-off-by: Vincent Tinelli Signed-off-by: Felipe Balbi Signed-off-by: Andy Shevchenko Acked-by: Simon Glass

x86: bootm: Fix FIT image booting on x86

2017-04-10T02:02:03Z

Checking 'is_zimage' at this time will always fail and therefore booting a FIT style image will always lead to this error message: "## Kernel loading failed (missing x86 kernel setup) ..." This change now removes this check and booting of FIT images works just fine. Signed-off-by: Stefan Roese Cc: Simon Glass Cc: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Bin Meng

x86: Add file names from Kconfig in descriptor/intel-me nodes in u-boot.dtsi

2017-04-10T02:02:03Z

Since we now have the file names configurable via Kconfig for the flash descriptor and intel-me files, add these from Kconfig in the corresponding dts nodes. Signed-off-by: Stefan Roese Cc: Bin Meng Cc: Simon Glass Reviewed-by: Bin Meng

x86: Kconfig: Add options to configure the descriptor.bin / me.bin filenames

2017-04-10T02:02:03Z

This introduces two Kconfig options to enable board specific filenames for the Intel binary blobs to be used to generate the SPI flash image. Signed-off-by: Stefan Roese Cc: Bin Meng Cc: Simon Glass Reviewed-by: Bin Meng

board_f: Make relocation functions generic

2017-04-05T20:36:57Z

This header file is used by three archs. It could be used by all of them since relocation is a common function. Move it into a generic file. Signed-off-by: Simon Glass