u-boot.git/arch, branch v2010.09

mpc512x: fix build issues

2010-09-28T21:02:05+00:00

Commit 800eb0964 "POST cleanup." removed file
arch/powerpc/cpu/mpc512x/common.c but failed to remove the reference
to it from arch/powerpc/cpu/mpc512x/Makefile which causes somewhat
obscure build errors:

make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc512x/.depend', needed by `_depend'.  Stop.

Fix these.

Signed-off-by: Wolfgang Denk

ARMV7: OMAP4: Calculate SDRAM size

2010-09-28T17:54:43+00:00

Calculate the SDRAM size from DMM configuration registers instead of using
hard-coded values. This gives correct values for all different boards.

It's assumed that DMM sections do not overlap memory areas.

Signed-off-by: Aneesh V 
Tested-by: Steve Sakoman 
Signed-off-by: Sandeep Paulraj

ixp/npe: Remove duplicated comment

2010-09-28T12:48:44+00:00

Signed-off-by: Thomas Weber

ppc4xx/fdt/flash: Change fdt_fixup_nor_flash_node() to not rely on cs size

2010-09-23T06:49:49+00:00

This patch changes the behaviour of the fdt_fixup_nor_flash_node()
function. Now it doesn't patch the size of the "reg" property with the
chip-select size, but with the size returned from the new function
flash_get_bank_size(). This function will return per weak default the
flash size of the bank (bank = chip-select numer) detected by the flash
driver. If this does not fit your needs, this function may be overridden
by a board specific one.

For this the parameters needed to be changed. So I intentionally squashed
the PPC4xx stuff using this routine into this patch. Otherwise it would
not be git-bisectable anymore.

The board specific function for the AMCC/APM Ebony eval board is now
included in this patch version.

Signed-off-by: Stefan Roese 
Tested-by: Detlev Zundel 
Cc: Gerald Van Baren 
Cc: Wolfgang Denk

Blackfin: bfin_spi: use same gpio cs define as Linux

2010-09-21T22:22:14+00:00

Linux uses an offset of 8 to switch from hardware cs to a gpio cs,
so have u-boot use the same value.  Also make sure it is public
for boards to access.

Signed-off-by: Mike Frysinger

POST cleanup.

2010-09-21T19:39:31+00:00

- Revives POST for blackfin arch;
- Removes redundant code:
     arch/blackfin/lib/post.c
     arch/powerpc/cpu/ppc4xx/commproc.c
     arch/powerpc/cpu/mpc512x/common.c
- fixes up the post_word_{load|store} usage.

Signed-off-by: Michael Zaidman 
Acked-by: Detlev Zundel 
Tested-by: Anatolij Gustschin 

List of the maintainers of the affected by patch boards:
Cc: Stephan Linz 
Cc: Denis Peter 
Cc: Matthias Fuchs 
Cc: Peter Tyser 
Cc: Stefan Roese 
Cc: Mike Frysinger 
Cc: Niklaus Giger 
Cc: Larry Johnson 
Cc: Feng Kan

Prepare v2010.09-rc2

2010-09-19T15:47:52+00:00

Signed-off-by: Wolfgang Denk

Save environment data to mmc.

2010-09-19T15:47:29+00:00

This patch is to save environment data to mmc card.
It uses interfaces defined in generic mmc.

Signed-off-by: Terry Lv 
Acked-by: Stefano Babic

ARM: Update ARM mach-types

2010-09-18T21:54:50+00:00

This patch updates the mach-types.h based on the latest linux kernel

Signed-off-by: Thomas Weber

x86: Fix x86 Cold Boot

2010-09-12T21:20:02+00:00

Commit 077e1958ca4afe12d88043b123ded058c51b89f7 broke the ability of the
x86 port to boot from a cold-reset by removing the initial IDT. Re-
instate the initial IDT to allow cold-booting of x86 boards