u-boot.git/arch, branch v2014.01 Unnamed repository; edit this file 'description' to name the repository. ARM: bcm2835: fix mailbox timeout 2014-01-20T22:11:39+00:00 Stephen Warren swarren@wwwdotorg.org 2014-01-14T02:50:12+00:00 004c10598b648341c08ebcbf77e9385a064aec47 My original intention was to have a 100ms timeout. However, the timer operations used return values in ms not us, so we ended up with a 100s timeout instead. Fixing this exposes that some operations need longer to operate than 100ms, so bump the timeout up to a whole second. Reported-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 
My original intention was to have a 100ms timeout. However, the timer
operations used return values in ms not us, so we ended up with a 100s
timeout instead. Fixing this exposes that some operations need longer
to operate than 100ms, so bump the timeout up to a whole second.

Reported-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
ARM: rpi_b: power on SDHCI and USB HW modules 2014-01-20T22:11:39+00:00 Stephen Warren swarren@wwwdotorg.org 2014-01-14T02:50:11+00:00 f66f2aa265f00d4fcf49cdfb23bcfd64360b291d Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. For SDHCI this isn't needed in practice, since the firmware already turned on the power in order to load U-Boot. However, it's best to be explicit. For USB, this is necessary, since the module isn't powered otherwise. This will allow the kernel USB driver to work. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 
Send RPC commands to the VideoCore to turn on the SDHCI and USB modules.
For SDHCI this isn't needed in practice, since the firmware already
turned on the power in order to load U-Boot. However, it's best to be
explicit. For USB, this is necessary, since the module isn't powered
otherwise. This will allow the kernel USB driver to work.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-01-20T12:33:42+00:00 Tom Rini trini@ti.com 2014-01-20T12:33:42+00:00 4641c211f6e37454c30770521c4de79c725036b0 






mx6: Revert "mx6: soc: Disable VDDPU regulator"
2014-01-17T09:16:48+00:00

Fabio Estevam
fabio.estevam@freescale.com

2014-01-16T12:57:29+00:00

be2a3bb39adf1fdd274fc427e30ef62eb86441a1

Commit 022298278 (mx6: soc: Disable VDDPU regulator) is causing kernel hang
for people using FSL kernel 3.0.35 and 3.10, so revert it for now.

Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Reported-by: Pierre Aubert <p.aubert@staubli.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>





Commit 022298278 (mx6: soc: Disable VDDPU regulator) is causing kernel hang
for people using FSL kernel 3.0.35 and 3.10, so revert it for now.

Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Reported-by: Pierre Aubert <p.aubert@staubli.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>







Merge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-16T18:50:16+00:00

Tom Rini
trini@ti.com

2014-01-16T18:50:16+00:00

4913fc23f0b19a82e2e9cc56f7ee0087839855c4












arm: rmobile: Add SH QSPI base register address
2014-01-15T23:07:20+00:00

Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj@renesas.com

2014-01-08T01:14:26+00:00

82852762ced9e08db3062394020f87bf0b1812b8

This adds base register address of SH QSPI.
Currently, SH QSPI is used only from R8A7790 and R8A7791.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>





This adds base register address of SH QSPI.
Currently, SH QSPI is used only from R8A7790 and R8A7791.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>







Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-15T14:18:04+00:00

Albert ARIBAUD
albert.u.boot@aribaud.net

2014-01-15T14:18:04+00:00

bf46e7d8d134521301ff02b6d97e8998aa10a83d












mx6: Add initial support for the Hummingboard solo
2014-01-15T09:33:25+00:00

Fabio Estevam
fabio.estevam@freescale.com

2014-01-03T17:55:58+00:00

3a21773129f6ef218f1978d05a1a5d5cf6801ab6

SolidRun has designed the Hummingboard board based on mx6q/dl/solo.

Add the initial support for the mx6 solo variant.

More information about this hardware can be found at:
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware

(Carrier-One was the previous name of Hummingboard).

Based on the work from Jon Nettleton <jon.nettleton@gmail.com>.

Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>





SolidRun has designed the Hummingboard board based on mx6q/dl/solo.

Add the initial support for the mx6 solo variant.

More information about this hardware can be found at:
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware

(Carrier-One was the previous name of Hummingboard).

Based on the work from Jon Nettleton <jon.nettleton@gmail.com>.

Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>







mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()
2014-01-15T09:33:25+00:00

Fabio Estevam
fabio.estevam@freescale.com

2014-01-03T17:55:57+00:00

5f98d0b5d3038cb3345712bc779efacaba4322f7

Provide an argument to enable_fec_anatop_clock() to specify the clock frequency
that will be generated.

No changes are made to mx6slevk, which uses the default 50MHz fec clock.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>





Provide an argument to enable_fec_anatop_clock() to specify the clock frequency
that will be generated.

No changes are made to mx6slevk, which uses the default 50MHz fec clock.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>







Merge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-14T19:48:42+00:00

Tom Rini
trini@ti.com

2014-01-14T19:48:42+00:00

b5c068f3f8be5c2f73fc6699885aec0d342099bb