u-boot.git/arch, branch v2017.09

usb: net: migrate USB Ethernet adapters to Kconfig

2017-09-08T14:23:00+00:00

This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.

Signed-off-by: Chris Packham 
Reviewed-by: Simon Glass

usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig

2017-09-08T14:21:46+00:00

CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.

Signed-off-by: Chris Packham 
Reviewed-by: Simon Glass

rockchip: enable SPL_SYSRESET config for all Rockchip SoCs

2017-09-08T09:45:19+00:00

With Makefiles testing for $(SPL_TPL_)SYSRESET, we need SPL_SYSRESET
for do_reset() in SPL for Rockchip SoCs.

References: 87c16d4 "drivers: spl: consistently use the $(SPL_TPL_) macro"
Signed-off-by: Kever Yang 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

rockchip: rk3328: fix syscon id table

2017-09-08T09:44:51+00:00

syscon id table need a dummy member as NULL ending, or else system
will panic while try to match a compatible in this table as a list.

Signed-off-by: Kever Yang 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

Merge git://git.denx.de/u-boot-rockchip

2017-09-05T11:11:46+00:00

rockchip: rk3288: Add reset reason detection

2017-09-05T09:04:35+00:00

Sometimes it's helpful to know the reset reason caused in the SoC.
Add reset reason detection for the RK3288 SoC.
This will set an environment variable which represents the reset reason.

Signed-off-by: Wadim Egorov 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

2017-09-05T02:17:59+00:00

ARM: rmobile: Add missing IPSR18 bits to R8A7795 PFC

2017-09-04T22:51:39+00:00

The IPSR18 register bits were missing from the R8A7795 ES2.0+ PFC
tables, which triggered a BUG() in sh_pfc driver. This is because
of an out-of-bounds access to the pinmux_gpios[] array in the PFC
tables, which was too short due to the missing IPSR18 bits.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu 
Signed-off-by: Nobuhiro Iwamatsu

x86: baytrail: acpi: Add full reset bit to the reset register value in FADT

2017-09-02T15:35:55+00:00

It was noticed a few times, that the reboot from Linux (reboot command)
is different from the reboot (reset command) under U-Boot. The U-Boot
version does seem to reset the board more deeply (PCI cards etc) than
the Linux reboot.

This is actually caused by missing full reset bit in the reset register
value in the ACPI FADT table.

Reported-by: Stefan Roese 
Signed-off-by: Bin Meng 
Tested-by: Stefan Roese

Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig

2017-09-02T00:45:26+00:00

This converts the following to Kconfig:
   CONFIG_SPL_OMAP3_ID_NAND

Signed-off-by: Adam Ford 
Reviewed-by: Simon Glass