- doc: fix code examples in qemu-mips.rst
- mips: vcoreiii: fix memtest and cache coherency issues
- cmd/go: fix cache coherency issues on MIPS

The FIT config node has reversed ATF and u-boot: ATF is set to 'firmware' but
u-boot is set to 'loadables'.
This script can work previously because spl fit driver wrongly appends fdt to
all loadable images. With the issue fixed in commit 9d15d1d1c24f ("Revert
"common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"") the
u-boot in 'loadables' does not have fdt appended and fails to work.  So correct
the script by moving u-boot to 'firmware' and ATF to 'loadables'.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reported-by: Matt Porter <mporter@konsulko.com>
Tested-by: Matt Porter <mporter@konsulko.com>

It has been noticed on MT7628/88 platforms, that booting the RAM image
does not work reliably. Sometimes it works and sometimes not. Debugging
showed that this "might" be a cache related issue as very strange
errors occurred (e.g. output corrupted etc).

This patch adds a cache flush for the complete SDRAM area to the go cmd
before jumping to the entry point for the MIPS architecture. The
complete area is flushed as we don't know at this point, how big the
area of the "application" really is.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Mauro Condarelli <mc5686@mclink.it>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Mauro Condarelli <mc5686@mclink.it>
Cc: Weijie Gao <weijie.gao@mediatek.com>

This patch fixes an stability issue seen on some vcoreiii targets,
which was root caused to a cache inconsistency situation.

The inconsistency was caused by having kuseg pointing to NOR area but
used as a stack/gd/heap area during initialization, while only
relatively late remapping the RAM area into kuseg position.

The fix is to initialize the DDR right after the TLB setup, and then
remapping it into position before gd/stack/heap usage.

Reported-by: Ramin Seyed-Moussavi <ramin.moussavi@yacoub.de>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

Allow SoC or board layers with reconfigurable cpu clocks
capabilties to do implementation specific lookups and service
get_tbclk() requests.

Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>

Useful in custom HW designs which have a need to flush dcache
range in a completely non standard way.

Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>

pd_dma_* nodes should be accessible during pre-relocation stage of
U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of
power_domain_get_by_index() in the common code of DM power domain
uclass (drivers/power/domain/power-domain-uclass.c).

Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

pd_dma_* nodes should be accessible during pre-relocation stage of
U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of
power_domain_get_by_index() in the common code of DM power domain
uclass (drivers/power/domain/power-domain-uclass.c).

Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are
handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)
{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl
`%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper
to explicitly state that they are handled during pre-relocation
stage of U-Boot proper.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are
handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)
{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl
`%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper
to explicitly state that they are handled during pre-relocation
stage of U-Boot proper.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>