u-boot.git/arch, branch v2022.04

ARM: dts: colibri-imx6ull: fix mac address passing

2022-04-01T14:05:24+00:00

colibri-imx6ull ethernet device is fec2, while the optional secondary
ethernet is fec1, update the ethernet aliases in the .dts file so that
ethaddr is set to fec2 and eth1addr to fec1.

Without this change the ethernet interfaces have a different
mac address between Linux and U-Boot.

Signed-off-by: Francesco Dolcini 
Reviewed-by: Fabio Estevam

Revert "x86: Move FACP table into separate functions"

2022-03-31T12:27:52+00:00

Before the culprit patch (see BugLink for the details):

  => acpi list
  Name      Base   Size  Detail
  ----  --------  -----  ------
  RSDP  000e4500     24  v02 U-BOOT
  RSDT  000e4530     38  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  XSDT  000e45e0     4c  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  CSRT  000e5490     58  v00 U-BOOT U-BOOTBL 20220401 INTL 0
  FACP  000e54f0    114  v06 U-BOOT U-BOOTBL 20220401 INTL 0
  DSDT  000e4780    c06  v02 U-BOOT U-BOOTBL 10000 INTL 20200925
  FACS  000e4740     40
  MCFG  000e5610     3c  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  SPCR  000e5650     50  v02 U-BOOT U-BOOTBL 20220401 INTL 0
  APIC  000e56a0     48  v02 U-BOOT U-BOOTBL 20220401 INTL 0

After the culprit patch:

  => acpi list
  Name      Base   Size  Detail
  ----  --------  -----  ------
  RSDP  000e4500     24  v02 U-BOOT
  RSDT  000e4530     34  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  XSDT  000e45e0     44  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  CSRT  000e53a0     58  v00 U-BOOT U-BOOTBL 20220401 INTL 0
  MCFG  000e5520     3c  v01 U-BOOT U-BOOTBL 20220401 INTL 0
  SPCR  000e5560     50  v02 U-BOOT U-BOOTBL 20220401 INTL 0
  APIC  000e55b0     48  v02 U-BOOT U-BOOTBL 20220401 INTL 0

As a result Linux kernel can't find mandatory tables and fails
to boot.

Hence, revert it for good.

This reverts commit 379d3c1fd6aa490b1ad5697525cfc89b615cf25a.

BugLink: https://lore.kernel.org/all/20220131225930.GJ7515@bill-the-cat/
Signed-off-by: Andy Shevchenko

powerpc: Fix incorrect SYS_IMMR migration values

2022-03-31T12:27:52+00:00

When migrating SYS_IMMR, I didn't allow for boards to provide
non-default values here.  This lead to an incorrect migration on the
platforms where CONFIG_SYS_IMMR is set to CONFIG_SYS_CCSRBAR and
CONFIG_SYS_CSSRBAR is NOT the same as CONFIG_SYS_CCSRBAR_DEFAULT.  Add
text to the prompt so that non-default values can be used and re-migrate
the platforms that have CONFIG_SYS_IMMR=CONFIG_SYS_CSSRBAR where
CONFIG_SYS_CSSRBAR != CONFIG_SYS_CCSRBAR_DEFAULT.

Fixes: be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")
Reported-by: Pali Rohár 
Signed-off-by: Tom Rini 
Tested-by: Pali Rohár

arm: apple: Fix mem layout

2022-03-28T12:22:17+00:00

The current approach for setting the environment variables that
describe the memory layout runs the risk of overlapping with
reserved memory regions. Use the lmb code to derive the addresses
for these variables instead.

Signed-off-by: Mark Kettenis 
Reviewed-by: Simon Glass

arm: apple: Increase RTKit timeout

2022-03-28T12:22:17+00:00

The firmware on larger NVMe drives needs more than 100ms to come up.
Change the timeout to 1s.

Signed-off-by: Hector Martin 
Signed-off-by: Mark Kettenis 
Reviewed-by: Simon Glass

sunxi: dts: Update RGMII phy-mode properties

2022-03-26T00:16:44+00:00

Commit f11513d99787 ("net: phy: realtek: Add tx/rx delay config for
8211e") made the Realtek PHY driver honour the phy-mode DT property,
to set up the proper delay scheme for the RX and TX lines. A similar
change in the kernel revealed that those properties were mostly wrong.
The kernel DTs got updated over the last few months, but we were missing
out on the U-Boot version.

Just sync in the phy-mode properties from the mainline kernel,
v5.17-rc7, to avoid the breaking DT sync that late in the cycle.

This fixes Ethernet operation on the affected boards.

Signed-off-by: Andre Przywara 
Reviewed-by: Samuel Holland

sunxi: Fix old GMAC pinmux setup

2022-03-26T00:16:06+00:00

Commit 5bc4cd05d7d4 ("sunxi: move non-essential code out of s_init()")
moved the call to eth_init_board() from s_init() into board_init_f().
This means it's now only called from the SPL, which makes sense for
most of the other moved low-level functions. However the GMAC pinmux and
clock setup in eth_init_board() was not happy about that, so it broke
the sun7i GMAC.

Since Ethernet is of no use in the SPL anyway, just move the call into
board_init(), which is only run in U-Boot proper.

This fixes Ethernet operation for the A20 SoCs, which broke in
v2022.04-rc1, with the above mentioned commit.

Signed-off-by: Andre Przywara 
Reviewed-by: Jernej Skrabec 
Tested-by: Petr Štetiar  [a20-olinuxino-lime2]

arm: a37xx: espressobin: Fix non-working SPI

2022-03-24T07:09:30+00:00

Commit 0934dddc6436 ("arm: a37xx: Update DTS files to version from
upstream Linux kernel") ported Linux's device-tree files for Armada 3720
SOCs. This broke SPI support on some Espressobin boards and results in
following U-Boot error:

  Loading Environment from SPIFlash... jedec_spi_nor flash@0: unrecognized JEDEC id bytes: f7, 30, 0b
  *** Warning - spi_flash_probe_bus_cs() failed, using default environment

Before that commit DT node for SPI was called 'spi-flash@0' and after
that commit it is called 'flash@0'. Before that commit 'spi-max-frequency'
was set to 50000000 and after it is 104000000.

Rename DT node 'spi-flash@0 in armada-3720-espressobin-u-boot.dtsi to
'flash@0' and set custom U-Boot 'spi-max-frequency' back to 50000000.

With this change SPI is working on Espressobin again and it is detected
with JEDEC ids ef, 60, 16 on our tested unit.

  Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  OK

Note that it is unknown why spi-max-frequency with value 104000000 does not
work in U-Boot as it works fine with Linux kernel. Also note that in
defconfig file configs/mvebu_espressobin-88f3720_defconfig is set option
CONFIG_SF_DEFAULT_SPEED=40000000 which is different value than in DT.

Fixes: 0934dddc6436 ("arm: a37xx: Update DTS files to version from upstream Linux kernel")
Signed-off-by: Pali Rohár 
Reviewed-by: Stefan Roese

arm: mvebu: dts: turris_mox: fix non-working USB port

2022-03-23T11:47:38+00:00

Commit 0934dddc6436 ("arm: a37xx: Update DTS files to version from
upstream Linux kernel") ported Linux's device-tree files for Armada 3720
SOCs. This broke USB port on Turris MOX, because in Linux' DTS the bus
voltage supply is described as a `phy-supply` property of connector
node, a mechanism that is not supported in U-Boot yet.

For now, fix this by adding `vbus-supply` to usb3 node.

Fixes: 0934dddc6436 ("arm: a37xx: Update DTS files to version from upstream Linux kernel")
Signed-off-by: Marek Behún 
Reviewed-by: Stefan Roese

rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE

2022-03-18T10:12:03+00:00

U-Boot can be chainloaded from vendor firmware on ARM64 chromebooks from
a GPT partition (roughly the same as in doc/chromium/chainload.rst), but
an appropriate image header must be built-in to the U-Boot binary by
enabling LINUX_KERNEL_IMAGE_HEADER.

This header has a field for an image load offset from 2MiB alignment
which must also be customized through LNX_KRNL_IMG_TEXT_OFFSET_BASE.
Set it equal to SYS_TEXT_BASE by default for Rockchip boards, which
happens to make this offset zero and works fine on chromebook_kevin
both for chainloading and bare-metal use.

Signed-off-by: Alper Nebi Yasak 
Reviewed-by: Simon Glass 
Reviewed-by: Kever Yang