u-boot.git/arch, branch v2022.10 Unnamed repository; edit this file 'description' to name the repository. imx8mn-ddr4-evk-u-boot: Fix broken boot 2022-10-03T17:38:42+00:00 Fabio Estevam festevam@denx.de 2022-10-03T14:02:03+00:00 0bd7811ca9b7321cbc9a5ecc234368975b3fe191 When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam <festevam@denx.de> 
When the imx8mn.dtsi file was pulled in from Linux, the UARTs
were moved into an spba sub-node which wasn't being included
in the SPL device tree.  This meant the references to the UART
weren't being handled properly and when booting the system would
constantly reboot.  Fix this by adding the spba node to the spl
device tree to restore normal booting.

Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot
board.

Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")
Signed-off-by: Fabio Estevam <festevam@denx.de>
imx8mn-venice-u-boot: Fix broken boot 2022-10-03T17:38:22+00:00 Fabio Estevam festevam@denx.de 2022-10-03T14:01:15+00:00 a2bf0373b81e80a6a7a4bda178a46bb9fde4e7b3 When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam <festevam@denx.de> 
When the imx8mn.dtsi file was pulled in from Linux, the UARTs
were moved into an spba sub-node which wasn't being included
in the SPL device tree.  This meant the references to the UART
weren't being handled properly and when booting the system would
constantly reboot.  Fix this by adding the spba node to the spl
device tree to restore normal booting.

Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot
board.

Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")
Signed-off-by: Fabio Estevam <festevam@denx.de>
ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlock 2022-09-20T16:30:02+00:00 Marek Vasut marex@denx.de 2022-09-19T19:37:07+00:00 fdf6bbb260c36bb54826bffb4dd4d62b90c3cede Pull this LPGPR unlock into common code, since it is used in multiple systems already. Signed-off-by: Marek Vasut <marex@denx.de> 
Pull this LPGPR unlock into common code, since it is used in multiple
systems already.

Signed-off-by: Marek Vasut <marex@denx.de>
arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsi 2022-09-20T16:30:02+00:00 Tim Harvey tharvey@gateworks.com 2022-09-09T21:42:38+00:00 9bf0cbf396beaf3257698f672207ab7849134618 The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: 24a7a3c1c042 ("imx8mm: synchronise device tree with linux") Signed-off-by: Tim Harvey <tharvey@gateworks.com> 
The upstream Linux DSA drivers do not require phy-handle nodes in
the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and
the mdio nodes to the u-boot.dtsi file so that future dts file
syncrhonization between Linux and U-Boot don't break networking.

Fixes: 24a7a3c1c042 ("imx8mm: synchronise device tree with linux")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
arm: dts: imx8mp-venice-gw74xx: add dsa phy handles to u-boot dtsi 2022-09-20T16:30:02+00:00 Tim Harvey tharvey@gateworks.com 2022-09-09T21:42:11+00:00 1581f1737851f7e44dcf1eebbc52bdd6f1f7c9ca The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: e0caa84ca685 ("imx8mp: synchronise device tree with linux") Signed-off-by: Tim Harvey <tharvey@gateworks.com> 
The upstream Linux DSA drivers do not require phy-handle nodes in
the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and
the mdio nodes to the u-boot.dtsi file so that future dts file
syncrhonization between Linux and U-Boot don't break networking.

Fixes: e0caa84ca685 ("imx8mp: synchronise device tree with linux")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Merge tag 'u-boot-imx-20220919' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2022-09-19T12:38:32+00:00 Tom Rini trini@konsulko.com 2022-09-19T12:38:32+00:00 c1db6be55da2fd157118425cb95145c4e737a908 u-boot-imx-20220919 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500 - Fix imx8mn-beacon-kit-u-boot - Merged Purism - imxrt1170 (already merged in u-boot-imx) - Fixes in crypto FSL - Toradex : fixes Verdin - Serial Driver: fixes when not used as console - DH Boards : fixes + USB - Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig) - Add imx6ulz_smm_m2 
u-boot-imx-20220919
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500

- Fix imx8mn-beacon-kit-u-boot
- Merged Purism
- imxrt1170 (already merged in u-boot-imx)
- Fixes in crypto FSL
- Toradex : fixes Verdin
- Serial Driver: fixes when not used as console
- DH Boards : fixes + USB
- Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig)
- Add imx6ulz_smm_m2
powerpc: mpc85xx: Fix incorrect application of patch 2022-09-19T12:30:58+00:00 Marek Behún kabel@kernel.org 2022-09-19T09:32:08+00:00 a0759684e015bd7252be3af508c0fcfdbb8ec5dc I messed up application of patch 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from a work-in-progress branch where I changed usage of CONFIG_SDCARD to CONFIG_SD_BOOT and refactored SYS_MPC85XX_NO_RESETVEC mess. But these changes aren't in master yet. Fix the wrong usage of these macros. Fixes: 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org> 
I messed up application of patch 5a428e751044 ("mmc: fsl_esdhc_spl: Add
support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from
a work-in-progress branch where I changed usage of
  CONFIG_SDCARD to CONFIG_SD_BOOT
and refactored
  SYS_MPC85XX_NO_RESETVEC
mess.

But these changes aren't in master yet. Fix the wrong usage of these
macros.

Fixes: 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without
CONFIG_SYS_MMC_U_BOOT_OFFS")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards 2022-09-18T20:56:18+00:00 Michael Trimarchi michael@amarulasolutions.com 2022-09-18T15:09:53+00:00 cc74cab86a5f32db93a9f0dc7bc46fa5e83f4f3e Introduce BSH SystemMaster (SMM) M2 board family, which consists of: imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards. Add support for imx6ulz BSH SMM M2 board: - 128 MiB DDR3 RAM - 256MiB Nand - USBOTG1 peripheral - fastboot. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de> 
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.

Add support for imx6ulz BSH SMM M2 board:

- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
board: purism: add the Purism Librem5 phone 2022-09-18T20:56:10+00:00 Angus Ainslie angus@akkea.ca 2022-08-25T13:46:02+00:00 466a9ea2a1ae0e6e0d4aed2d74a9e71240912654 Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie <angus@akkea.ca> Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Fabio Estevam <festevam@denx.de> 
Initial commit of Librem5 u-boot and SPL

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Fabio Estevam <festevam@denx.de>
ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM 2022-09-18T20:56:10+00:00 Marek Vasut marex@denx.de 2022-08-12T20:41:55+00:00 2debd004fe3cb5dfb14319f068d5a69e23a8d53d Fix copy-paste error of the I2C5 bus recovery GPIO assignment, the I2C5 GPIOs are on gpio3 instead of gpio5. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com> 
Fix copy-paste error of the I2C5 bus recovery GPIO assignment,
the I2C5 GPIOs are on gpio3 instead of gpio5.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>