u-boot.git/board/CarMediaLab/flea3/flea3.c, branch v2017.01Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/CarMediaLab/flea3/flea3.c?h=v2017.012016-11-16T19:53:55Zmx35: add GPIO setup on flea3 board2016-11-16T19:53:55ZStefano Babicsbabic@denx.de2016-10-17T13:51:34Zurn:sha1:322ac5f1d5e564bca95cce7d8410c215f93a0255
Hardware revision "e" of the board introduces
a GPIO to reduce power consumption in stand-by mode.
This must be enable (active low) at the startup
for normal behaviour.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>
mx35: factorize SDRAM setup in flea32016-11-16T19:53:55ZStefano Babicsbabic@denx.de2016-10-17T13:51:33Zurn:sha1:146fff347aaf241246a59ce0fe02543499a45147
Drop local function to setup SDRAM controller
and use the common one for i.MX35.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>
mx35: add DT support to flea3 board2016-11-16T19:53:55ZHeiko Schocherhs@denx.de2016-10-17T13:51:32Zurn:sha1:72c1015307afe6cf4541166964216a4f733b3faa
Signed-off-by: Heiko Schocher <hs@denx.de>
treewide: replace #include <asm/errno.h> with <linux/errno.h>2016-09-23T21:55:42ZMasahiro Yamadayamada.masahiro@socionext.com2016-09-21T02:28:55Zurn:sha1:1221ce459d04a428f8880f58581f671b736c3c27
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap <asm-generic/errno.h>)
Replace all include directives for <asm/errno.h> with <linux/errno.h>.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add GPL-2.0+ SPDX-License-Identifier to source files2013-07-24T13:44:38ZWolfgang Denkwd@denx.de2013-07-08T07:37:19Zurn:sha1:1a4596601fd395f3afb8f82f3f840c5e00bdd57a
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
imx: flea3: Convert to iomux-v32013-05-05T15:55:03ZBenoît Thébaudeaubenoit.thebaudeau@advansee.com2013-05-03T10:32:20Zurn:sha1:686e14488e04564c3760145a35d03c7ffecb0f58
There is no change of behavior.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
mx35: Fix broken pin definitions2012-09-01T12:58:28ZBenoît Thébaudeaubenoit.thebaudeau@advansee.com2012-08-14T09:39:49Zurn:sha1:fe24d6143d11448ae8cbe386a4ef514dfb8bb528
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
mx35: Fix typo on EDIO2012-09-01T12:58:26ZBenoît Thébaudeaubenoit.thebaudeau@advansee.com2012-08-14T03:28:24Zurn:sha1:34a31bf52b83fd689c414f54eab2f263b5f5383d
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
MX35: flea3: changes due to hardware revision B2011-12-06T22:59:40ZStefano Babicsbabic@denx.de2011-11-25T08:08:36Zurn:sha1:fda241d59d12381493f31e38f94a2057a955ec94
Revision B of the board uses CSD0 for the DRAM,
as usual for MX3 boards. The patch fixes also
some values in the U-Boot environment.
Signed-off-by: Stefano Babic <sbabic@denx.de>
MX35: add support for flea3 board2011-11-03T21:56:20ZStefano Babicsbabic@denx.de2011-10-23T23:58:20Zurn:sha1:deb53483df20d3a02bb041624ca91c93adc3ec87
The flea3 board is a custom board by CarMediaLab used
in automotive.
Network (FEC), NOR, NAND and SPI are supported.
Signed-off-by: Stefano Babic <sbabic@denx.de>