u-boot.git/board/Marvell/sheevaplug, branch master

arm: kirkwood: Enable bootstd for Sheevaplug board

2024-11-26T12:19:48+00:00

Enable bootstd for Sheevaplug board.
Remove JFFS2 support. See JFFS2 Vulnerability[1].
Enable LTO to keep board size within limit.
Move default envs to text-base environment

[1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b

Signed-off-by: Tony Dinh 
Reviewed-by: Stefan Roese

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

board: Marvell: Remove and add needed includes

2024-05-06T21:07:48+00:00

Remove  from this board vendor directory and when needed
add missing include files directly.

Reviewed-by: Chris Packham 
Reviewed-by: Tony Dinh 
Reviewed-by: Stefan Roese 
Signed-off-by: Tom Rini

arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet

2022-04-21T11:14:52+00:00

The Globalscale Technologies Sheevaplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Remove CONFIG_RESET_PHY_R symbol from all board files
- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/sheevaplug/sheevaplug.h, use BIT macro, and add/cleanup
comments.

Signed-off-by: Tony Dinh

arm: kirkwood: Sheevaplug: Update board maintainer

2021-09-10T07:01:51+00:00

Change maintainer to me. Prafulla is no longer active in U-Boot community.

Signed-off-by: Tony Dinh 
Reviewed-by: Stefan Roese

arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from device tree

2021-07-19T06:44:18+00:00

- In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree. Also, Ethernet PHY address
is available so read it from device tree.

Signed-off-by: Tony Dinh

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

common: Drop init.h from common header

2020-05-18T21:33:33+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

common: Move reset_phy() to net.h

2020-01-17T18:26:50+00:00

This is a network function so let's move it into that header.

Signed-off-by: Simon Glass