u-boot.git/board/Marvell, branch master Unnamed repository; edit this file 'description' to name the repository. treewide: Clean up DECLARE_GLOBAL_DATA_PTR usage 2026-02-17T19:50:22+00:00 Peng Fan peng.fan@nxp.com 2026-02-09T01:30:18+00:00 0f90b1e715f8abe41b0875752eb184f46032ff11 Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and drop the unnecessary inclusion of asm/global_data.h. Headers should be included directly by the files that need them, rather than indirectly via global_data.h. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards Acked-by: Yao Zi <me@ziyao.cc> #TH1520 Signed-off-by: Peng Fan <peng.fan@nxp.com> 
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
kbuild: Bump the build system to 6.1 2026-01-02T16:28:14+00:00 Sughosh Ganu sughosh.ganu@linaro.org 2025-12-16T09:16:24+00:00 bd3f9ee679b4d1456d0d3c261ab76788950e6096 Our last sync with the kernel was 5.1. We are so out of sync now, that tracking the patches and backporting them one by one makes little sense and it's going to take ages. This is an attempt to sync up Makefiles to 6.1. Unfortunately due to sheer amount of patches this is not easy to review, but that's what we decided during a community call for the bump to 5.1, so we are following the same guidelines here. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next 
Our last sync with the kernel was 5.1.

We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.

This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next
MAINTAINERS: Update Luka Perkov's roles 2025-09-23T18:37:40+00:00 Tom Rini trini@konsulko.com 2025-09-15T21:01:09+00:00 a6caca94fc77dbe1db9484915241f77909aa43e3 Per a private email, drop Luka Perkov from MAINTAINERS entries. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
Per a private email, drop Luka Perkov from MAINTAINERS entries.

Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
treewide: Remove empty board_init() function from all boards 2025-07-24T19:30:19+00:00 Sam Protsenko semen.protsenko@linaro.org 2025-07-17T02:44:26+00:00 70a4d1fa1ddb2f5f8f9a27442563f182549abbb5 Commit 86acdce2ba88 ("common: add config for board_init() call") introduced CONFIG_BOARD_INIT option. This option can be disabled for the boards where board_init() function is not needed. Remove empty board_init() calls for all boards where it's possible, and disable CONFIG_BOARD_INIT in all related defconfigs. This cleanup was made semi-automatically using these scripts: [1]. No functional change, but the binary size for the modified boards is reduced a bit. [1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon Tested-by: Bryan Brattlof <bb@ti.com> Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards 
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.

This cleanup was made semi-automatically using these scripts: [1].

No functional change, but the binary size for the modified boards is
reduced a bit.

[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com>  #NXP boards
global: Cleanup usage of "ETH_ALEN" 2025-06-02T23:26:16+00:00 Tom Rini trini@konsulko.com 2025-05-21T22:51:22+00:00 824f8f52a1e44f6d281d3f89f23b3e85824a34fb The value of "ETH_ALEN" is defined to 6 in <linux/if_ether.h>. This file is included in <net.h>. In the places where we had ETH_ALEN but no direct include of <net.h>, add <linux/if_ether.h>. In the places where we had a custom name used, make use of ETH_ALEN instead. Signed-off-by: Tom Rini <trini@konsulko.com> 
The value of "ETH_ALEN" is defined to 6 in <linux/if_ether.h>. This file
is included in <net.h>. In the places where we had ETH_ALEN but no
direct include of <net.h>, add <linux/if_ether.h>. In the places where
we had a custom name used, make use of ETH_ALEN instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
arm: kirkwood: Enable bootstd and other modernization for OpenRD boards 2025-01-28T08:08:44+00:00 Tony Dinh mibodhi@gmail.com 2024-11-27T00:57:16+00:00 116d1d0047d7479ea5b72260314d46ebf0927e19 Enable bootstd for OpenRD boards Update defconfigs to the latest u-boot requirements Remove JFFS2 support. See JFFS2 Vulnerability[1]. Move default envs to text-base environment [1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Enable bootstd for OpenRD boards
Update defconfigs to the latest u-boot requirements
Remove JFFS2 support. See JFFS2 Vulnerability[1].
Move default envs to text-base environment

[1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
fdt: Swap the signature for board_fdt_blob_setup() 2024-12-18T21:18:59+00:00 Simon Glass sjg@chromium.org 2024-11-02T17:49:42+00:00 fc37a73e667916e15e01e0f9d189da792df2b351 This returns a devicetree and updates a parameter with an error code. Swap it, since this fits better with the way U-Boot normally works. It also (more easily) allows leaving the existing pointer unchanged. No yaks were harmed in this change, but there is a very small code-size reduction. For sifive, the OF_BOARD option must be set for the function to be called, so there is no point in checking it again. Also OF_SEPARATE is defined always. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> [trini: Update total_compute] Signed-off-by: Tom Rini <trini@konsulko.com> 
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.

No yaks were harmed in this change, but there is a very small code-size
reduction.

For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
arm: kirkwood: Enable bootstd for Sheevaplug board 2024-11-26T12:19:48+00:00 Tony Dinh mibodhi@gmail.com 2024-11-21T19:02:27+00:00 96ca3147981ab1bdd10426a3d2792e1d99bad321 Enable bootstd for Sheevaplug board. Remove JFFS2 support. See JFFS2 Vulnerability[1]. Enable LTO to keep board size within limit. Move default envs to text-base environment [1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Enable bootstd for Sheevaplug board.
Remove JFFS2 support. See JFFS2 Vulnerability[1].
Enable LTO to keep board size within limit.
Move default envs to text-base environment

[1] https://lore.kernel.org/u-boot/20241114233005.GN3600562@bill-the-cat/T/#m2fc25da1d2c019bc3cd8676991fdd64b8a21aa9b

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
power: regulator: Drop regulators_enable_boot_on/off() 2024-10-01T01:19:07+00:00 Marek Vasut marex@denx.de 2024-09-26T23:14:15+00:00 6f52feee2867f138af3d81a90a02a2b222e3366d Both regulators_enable_boot_on/off() are unused and superseded by regulator uclass regulator_post_probe(). Remove both functions. Signed-off-by: Marek Vasut <marex@denx.de> 
Both regulators_enable_boot_on/off() are unused and superseded by
regulator uclass regulator_post_probe(). Remove both functions.

Signed-off-by: Marek Vasut <marex@denx.de>
treewide: drop redundant "type string" for SYS_SOC and friends 2024-09-10T19:14:59+00:00 Rasmus Villemoes rasmus.villemoes@prevas.dk 2024-09-04T08:18:40+00:00 52ec7b7c89ff1256daed551012e378df7fce4564 The Kconfig symbols SYS_ARCH, SYS_CPU, SYS_SOC, SYS_VENDOR and SYS_BOARD are defined in arch/Kconfig as having type string, and most board files simply amend those definition with suitable default "foo" or default "foo" if BAR stanzas. But some also include a redundant repetition of the type. Homogenize the code base by removing those lines. Generated by find arch/*/ board -name Kconfig | xargs perl -i -g -pe 's/(config SYS_(ARCH|CPU|SOC|VENDOR|BOARD)\n)\s*string\n/\1/gs' with the trailing slash in arch/*/ ensuring that arch/Kconfig itself is not found. This does not change boards which add a prompt string, e.g. string "Board name" because I think those change the semantics of the symbol into being user-settable. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Tom Rini <trini@konsulko.com> 
The Kconfig symbols SYS_ARCH, SYS_CPU, SYS_SOC, SYS_VENDOR and
SYS_BOARD are defined in arch/Kconfig as having type string, and most
board files simply amend those definition with suitable

  default "foo"

or

  default "foo" if BAR

stanzas. But some also include a redundant repetition of the type.

Homogenize the code base by removing those lines.

Generated by

  find arch/*/ board -name Kconfig | xargs perl -i -g -pe 's/(config SYS_(ARCH|CPU|SOC|VENDOR|BOARD)\n)\s*string\n/\1/gs'

with the trailing slash in arch/*/ ensuring that arch/Kconfig itself
is not found.

This does not change boards which add a prompt string, e.g.

  string "Board name"

because I think those change the semantics of the symbol into being
user-settable.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>