u-boot.git/board/adder, branch v2008.10

Cleanup out-or-tree building for some boards (.depend)

2008-07-02T21:49:18+00:00

Signed-off-by: Wolfgang Denk

Change initdram() return type to phys_size_t

2008-06-12T06:50:18+00:00

This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce

Big white-space cleanup.

2008-05-20T22:14:08+00:00

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk

8xx : Add OF support to Adder875 board port - resubmit

2008-03-25T21:20:36+00:00

Signed-off-by: Bryan O'Donoghue

Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections

2008-01-12T19:31:39+00:00

With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05+00:00

Based on patch by Mike Frysinger, 20 Jun 2006

Add support for a saving build objects in a separate directory.

2006-09-01T17:49:50+00:00

Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.

Add support for Adder boards with 16MB SDRAM;

2006-03-12T00:43:03+00:00

add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005

2005-12-12T15:06:05+00:00

Fix problems with ld version 2.16 (dot outside sections problem)

2005-08-31T10:28:00+00:00

Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html