u-boot.git/board/advantech, branch v2018.09

x86: baytrail: Drop EFI-specific test logics

2018-06-17T13:16:04+00:00

Now that we have generic EFI payload support, drop EFI-specific test
logics in BayTrail Kconfig and codes, and all BayTrail boards too.

Signed-off-by: Bin Meng 
Reviewed-by: Simon Glass

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

x86: baytrail: fsp: Move Azalia update codes to board

2017-10-19T03:37:51+00:00

Azalia configuration may be different across boards, hence it's not
appropriate to do that in the SoC level. Instead, let's make the
SoC update_fsp_azalia_configs() routine as a weak version, and do
the actual work in the board codes.

So far it seems only som-db5800-som-6867 board enables the Azalia.
Move the original codes into som-db5800-som-6867.c.

Signed-off-by: Bin Meng 
Reviewed-by: Stefan Roese

imx: Include header file

2017-10-12T15:31:16+00:00

When building with W=1 errors like the one below is seen:

board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning:
no previous prototype for ‘overwrite_console’
[-Wmissing-prototypes] int overwrite_console(void)

Fix the build warnings by including .

Signed-off-by: Diego Dorta 
Reviewed-by: Fabio Estevam

x86: kconfig: Let board select SPI flash

2017-08-01T12:17:02+00:00

Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessary except coreboot, which implies all
available flash drivers there.

Signed-off-by: Bin Meng 
Reviewed-by: Simon Glass

x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig

2017-08-01T12:17:02+00:00

This is architecture-dependent early initialization hence should
be put in the platform Kconfig.

Signed-off-by: Bin Meng 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Simon Glass

x86: kconfig: Let board select BOARD_EARLY_INIT_F

2017-08-01T12:17:02+00:00

CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes
and should be not 'default y' for all x86 boards.

Signed-off-by: Bin Meng 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Simon Glass

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44+00:00

Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic 

CC: Fabio Estevam 
CC: Akshay Bhat 
CC: Ken Lin 
CC: Marek Vasut 
CC: Heiko Schocher 
CC: "Sébastien Szymanski" 
CC: Christian Gmeiner 
CC: Stefan Roese 
CC: Patrick Bruenn 
CC: Troy Kisky 
CC: Nikita Kiryanov 
CC: Otavio Salvador 
CC: "Eric Bénard" 
CC: Jagan Teki 
CC: Ye Li 
CC: Peng Fan 
CC: Adrian Alonso 
CC: Alison Wang 
CC: Tim Harvey 
CC: Martin Donnelly 
CC: Marcin Niestroj 
CC: Lukasz Majewski 
CC: Adam Ford 
CC: "Albert ARIBAUD (3ADEV)" 
CC: Boris Brezillon 
CC: Soeren Moch 
CC: Richard Hu 
CC: Wig Cheng 
CC: Vanessa Maegima 
CC: Max Krummenacher 
CC: Stefan Agner 
CC: Markus Niebel 
CC: Breno Lima 
CC: Francesco Montefoschi 
CC: Jaehoon Chung 
CC: Scott Wood 
CC: Joe Hershberger 
CC: Anatolij Gustschin 
CC: Simon Glass 
CC: "Andrew F. Davis" 
CC: "Łukasz Majewski" 
CC: Patrice Chotard 
CC: Nobuhiro Iwamatsu 
CC: Hans de Goede 
CC: Masahiro Yamada 
CC: Stephen Warren 
CC: Andre Przywara 
CC: "Álvaro Fernández Rojas" 
CC: York Sun 
CC: Xiaoliang Yang 
CC: Chen-Yu Tsai 
CC: George McCollister 
CC: Sven Ebenfeld 
CC: Filip Brozovic 
CC: Petr Kulhavy 
CC: Eric Nelson 
CC: Bai Ping 
CC: Anson Huang 
CC: Sanchayan Maity 
CC: Lokesh Vutla 
CC: Patrick Delaunay 
CC: Gary Bisson 
CC: Alexander Graf 
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam 
Reviewed-by: Christian Gmeiner

Kconfig: Add CONFIG_SATA to enable SATA

2017-07-11T16:08:19+00:00

At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

board: advantech: dms-ba16: apply the proper register setting to fix the voltage peak issue

2017-04-12T16:05:01+00:00

Apply the proper setting for the reserved bits in SetDes Test and System Mode Control register
to avoid the voltage peak issue while we do the IEEE PHY comformance test

Signed-off-by: Ken Lin 
Acked-by: Akshay Bhat